
Consists of a beaker which acts as reservoir- glass U-tube of 10mm diameter- stopcock near top of shorter
Note:
View Details
High Quality unit supplied with hand pump.
Note:
View Details
Made of borosilicate glass. Preparative and analytical glassware for distillation experiments.
Note:
View Details
Flask inverted allowing one end dipped into water. For use in fountain experiment.
Note:
View Details
A rapid heat switch allows higher temperatures to be obtained quickly.
Note:
View Details
Range of Quickfit glassware designed to cover basic requirements of teaching organic chemistry.
Note:
View Details
Fitted with immersion heating element for electrical operation.
Note:
View Details
Strong- pliable- leak- and puncture-resistant.
Note:
View Details
Removable stainless steel pan diam 20cm. Capacity 2kg.
Note:
View Details
Balance has three notched weighing beams with centre indicating sliding masses.
Note:
View Details
Stainless steel weighing pans. 9V battery or AC operation.
Note:
View Details
Stainless steel weighing pans. 9V battery or AC operation.
Note:
View Details
Accurate and sensitive scale. Wide view dial.
Note:
View Details
Can be used to build atoms or for electrostatic experiments.
Note:
View Details
For blow pipe work compressed rectangular blocks.
Note:
View Details
This in turn helps with the analysis of small samples. Brass pipe chrome plated- bent end.
Note:
View Details
Heavy gauge copper vessel with internal perforated shelf for copper sulphate crystals
Note:
View Details
Jar with zinc and copper plate electrodes. For Electrochemistry.
Note:
View Details
The bio-clock works on literally anything (toothpaste- sauces- coke etc)
Note:
View Details.jpg)
Lsskenya Used in flame testing as an optical filter to filter out the yellow flame
Note:
View Details
Uses test tubes only. Filter setting is controlled by a rotating disc having 8 filters.
Note:
View Details.jpg)
The piston inside a heavy-walled combustion tube is housed inside a transparent plastic outer cylinder
Note:
View Details
Cup and rod held by stopper in a dished cap. Used in gas preparation and analysis.
Note:
View Details
Simple to use- mixed bed colour change resin to indicate cartridge exhaustion.
Note:
View Details
For electrochemistry experiments. 100x45mm plate with socket terminal.
Note:
View Details
For electrochemistry experiments. 100x10mm rod with terminal.
Note:
View Details
100x10mm rod- carbon rod in glass tube with terminal.
Note:
View Details
Cylindrical shape flask/vessel provides vacuum- silvered glass in plastic container with screw cap.
Note:
View Details
Kit includes enough material for 4 students or small groups to work simultaneously.
Note:
View Details
Students use completely safe- easy-to-use materials to test reactions of various metals with acids- produce
Note:
View Details
The two stainless steel electrodes are heavily insulated and the two electrical connection leads are equipped with extra large clips.
Note:
View Details
Students observe chemical changes such as formation of precipitates, colour changes and production
Note:
View Details
Shift of chemical equilibrium is explored in the following systems: acetic acid/sodium acetate
Note:
View Details
Each student tests salt solutions for relative pH- predicts relative strength and determines the occurrence of hydrolysis.
Note:
View Details
Students empirically test Le CHATELIERS Principle by encouraging one of two simultaneous chemical reactions
Note:
View Details
Pyrotechnic eruption. Produce two real erupting volcanoes - dust- flames and ashes.
Note:
View Details
Stirs and mixes solutions with use of magnetic stirrer bar (not included) immersed in the liquid which spins very quickly.
Note:
View Details
Teflon coated magnet bar aids in stirring/mixing of solutions etc.
Note:
View Details
Automatic or manual temperature compensation. pH/ORP: 0.00 ~ 14.00 and -1999 ~ +1999mV.
Note:
View Details
Ideal for education and for measurements in the field.
Note:
View Details
Shows shape of each orbital, Positive and negative regions of orbital indicated by colour- cross sections
Note:
View Details
For modelling complex molecular structures of organic and inorganic compounds.
Note:
View Details
Set consists of 84 connectors and 57 jacks. Model of compound.
Note:
View Details
Set consists of 69 connectors, 8 long black connectors, 45 black jacks, 12 red jacks.
Note:
View Details
Set consists of 54 connectors, 13 black jacks, 14 red jacks.
Note:
View Details
This set consists of orbital models of ethane- ethylene- acetylene
Note:
View Details
Your students will be able to understand why when they view the arrangement
Note:
View Details
Test papers used for chemistry applications. Cobalt-chloride
Note:
View Details
Creates suction for transferring fluids. For use with pipettes up to 25ml.
Note:
View Details
Made of extruded brass. Its mechanism creates vacuum when connected as water passes through.
Note:
View Details
Pumping rate is 15ml per stroke and will displace up to 725 ml of air.
Note:
View Details
General purpose- quiet running. Pumping rate: +/- 50 litres / min.
Note:
View Details
Geiger counter complete with high sensitivity GM tube to detect Alpha, Beta and Gamma radiation.
Note:
View Details
Securely encapsulated in heat-resistant, waterproof plastic disks.
Note:
View Details
For use in experiments involving measurement of cell EMF under conditions
Note:
View Details
Determines how much light is absorbed by a solution by providing a beam of monochromatic radiation.
Note:
View Details
For lighting burners or testing for oxygen. Glowing splints. Wood Splints.
Note:
View Details
Used as electrodes in electrochemistry to create simple cell- or in thermal conductivity experiments.
Note:
View Details
Compass accommodates marker and chalk. Durable, lightweight plastic instruments, designed
Note:
View Details
Calculating instrument that uses beads that slide along a series of wires or rods set
Note:
View Details
Calculating instrument that uses beads that slide along a series of wires or rods set
Note:
View Details
As students manipulate the balance, they gain insight into abstract concepts of number operations
Note:
View Details
Complete with weights of plastic and metal with built-in weight storage compartment.
Note:
View Details
Sliding compensator for zero adjustments provides accurate measurements.
Note:
View Details
Manipulate these tough plastic beads on colourful strings to stimulate motor skills, develop concepts
Note:
View Details
Made from polystyrene plastic and feature handles for ease of use.
Note:
View Details
Necessary for example, for advanced trigonometric functions and investigating algebraic
Note:
View Details
Solar power with battery backup. Auto shut off.
Note:
View Details
Students point the clinometer at the top of a tree or building, pull the trigger
Note:
View Details
Hidden gears maintain correct hour and minute relationships.
Note:
View Details
Movable plastic hands on durable, colourful wooden face are controlled by visible gears
Note:
View Details
Displaying analogue time showing numbers 1-12 on a white face with an hour and minute hand with second hand.
Note:
View Details
Wall mountable. Large number, hour and minute, digital display clock.
Note:
View Details
100 sturdy plastic counters in four colours. Demonstrate counting, sorting and probability.
Note:
View Details
Each precision cube measures one centimetre and has a volume of one cubic centimetre.
Note:
View Details
Various colour cubes feature fractions decimals and percents clearly marked on each side
Note:
View Details
Each precision cube measures one centimetre and has a volume of one cubic centimetre.
Note:
View Details
Standard conventional dice used to perform probability activities, or to play board games.
Note:
View Details
Four dice with colours, shapes and numbers on the faces. Probability Dice.
Note:
View Details
Set of 168 blocks includes storage bucket with Activity Guide.
Note:
View Details
Fractions include increments of halves, thirds, fourths, fifth, sixes, tenths and twelfths.
Note:
View Details
The fraction strips are colour coded for easy identification and break into perfect fractions
Note:
View Details
The highest correct answer takes each trick. Deck includes a card with suggestions
Note:
View Details
Board game involving card with spelling, words and sentences which require correction or correcting structure.
Note:
View Details
8" plastic square is two-sided with a 5 x 5 pin array on the front and a 12-pin circular pattern on the back.
Note:
View Details
Shapes have a common three-inch dimension to illustrate relationships between area volume shape form and size.
Note:
View Details
The large size allows for exciting tabletop demonstrations. Each shape can be filled with water or flowing solids.
Note:
View Details
Clear markings let students accurately construct and measure angles triangles and other geometric shapes.
Note:
View Details
The kit contains a Binostat with 150 balls, 6 sampling bottles (3 with long tubes and 3 with short tubes)
Note:
View Details
This kit contains: Multiplication and decimal fraction board, Square tangram, Fraction strips
Note:
View Details
Flexible, plastic links are easy for residents to hook together and separate.
Note:
View Details
Indispensable in allowing learners the opportunity to construct their own knowledge in Euclidean and transformation geometry.
Note:
View Details
Double-sided distortion-free plastic mirrors help teach concepts of symmetry when used with Pattern Blocks.
Note:
View Details
Assists in learning basic operations with numbers, plus exciting activities finding and investigating number patterns.
Note:
View Details
Use at an appropriate level to demonstrate the value of zero as a placeholder and the changing value of a digit.
Note:
View Details
Set of five laminated number lines, each 5 metres in length.
Note:
View Details
Rods come in various lengths that can be assigned different numeric values or units of measure.
Note:
View Details
Strong enough to draw around, stack and handle.
Note:
View Details
Develop fine motor skills, colour discrimination, imagination, sequencing, counting
Note:
View Details
Sequencing, matching, sorting, counting, recognition of number patters
Note:
View Details
Includes 1 each of 17 shapes: octagon, pentagon, square, hexagon, equilateral triangle
Note:
View Details
These plastic tangrams make 4" squares. Includes 4 sets of seven pieces (colours may vary).
Note:
View Details
Students use these 1" plastic tiles in 4 colours to build vertical, horizontal
Note:
View Details
Measure long distances, or demonstrate the relationship between the circumference and diameter of a circle.
Note:
View Details
Contains squares, rectangles, triangles, pentagons, hexagons and 1 peg/axle remover.
Note:
View Details
Iron ring holds 12.0" diameter net for collection Suitable for all grades and ages View Details

Half size model- 7 parts. Model is hand painted and mounted on stand for display and study. View Details

Wooden Microscope slide box - Holds 25 25x75mm slides. View Details

This innovative device is a compact dry block heater which can be used as a small View Details

Microcentrifuge is ideal for quick spin downs, micro-filter cell separations View Details

Bioviewers are tough styrene instruments, almost unbreakable View Details

This allows graph paper to be mounted behind the manometer. View Details

Life size 2 part human brain is a median section model. View Details

This 5-part classic brain model is an original anatomic cast of a real human brain and comes View Details

The model shows DNA and transcription of RNA. Complete with stand, instructions and model description. View Details

The sky is the limit to what you can teach using these new large-scale, colour-coded foam nucleotides. View Details

Colourful representation of the outer, inner and middle ear with removable eardrum View Details

Ossicles and labyrinth can be taken out. Mounted on base, numbered and with Key Card. View Details

Approximately 3 x life size. Detailed and accurate dissectable 6 part View Details

Mounted on a pedestal stand 150mm high. Supplied with key card. View Details

The adjustment of the crystalline lens is made by mechanical stress on the flexible len View Details

A life-sized 2-part model which shows the anatomy of the human heart View Details

Mounted on a base. Numbered with English Key Card. View Details

Numbered with English Key Card. Both atria and ventricles with bicuspid View Details

An exceptionally good-value heart model which clearly demonstrates View Details

Mounted on a base. Numbered with English Key Card. View Details

Dimensions: 220 x 330mm. Large, detailed model of a flower, with the pistil View Details

Mounted on base. Numbered with English Key Card. View Details

A cost effective mini skeleton with moveable joints and complete with stand. View Details

The most popular skull for anatomical study, at very affordable price View Details
.jpg)
All parts unbreakable. Dimensions (Height): 500mm. View Details

This 12 part anatomically correct human torso from 3B is a quality educational tool. View Details

This classic 18-part unisex human torso model from 3B is hand-painted true View Details

For anaesthetising Drosophila. Flies remain immobilised for at least 50 minutes. View Details

This White Light Box features a spacious 250 x 250mm viewing area illuminated View Details

Sufficient to make 5 litres of working buffer. Tris-borate, EDTA buffer solution for electrophoresis. View Details

Colour may vary. Microtest Tube rack which holds 80 x 1.5/2.0ml tubes. View Details

A bottle of 25 beads. Each PCR contains: Taq DNA Polymerase buffer, dNTP Mixture, MgCl2 View Details

Unit pk Quantity 200 (in two racks of 100) View Details

Gel Loading Solution 10X Recommended usage: Add 1 volume solution to 9 volumes of sample View Details

Tube Size 1.5 - 2.0 mL Takes 24 PCR tubes. View Details

Kit includes: Set of 6 Plates 96-well plastic microtiter plates. View Details

The Lsskenya Blue Light Transilluminator is for viewing DNA gels stained View Details

Students will perform an enzyme assay and determine the rate of the enzymatic reaction. View Details

Kit includes: instructions, Sodium Bicarbonate (baking soda), liquid soap, plastic syringes View Details

Students will observe cell respiration of germinating seeds and describe the effects of temperature on the rate of cell respiration. View Details

This experiment uses a safer system that eliminates the need for sulfuric acid and potassium permanganate. View Details

In this experiment your students will use agglutination to identify the blood group View Details

Ideal for growing bacteria on agar plates at 37ËšC or for Southern and Western Blot analysis at 60ËšC. View Details

Upon arrival at the local hospital, one of the passengers succumbed to his injuries View Details

In this experiment, students will determine the validity of the hypothesis set forth by the detective. View Details

In this experiment, a mixture of two chemicals is absorbed onto a solid support ion-exchange column View Details

Virtually eliminates UV eye fatigue when working for extended periods with UV light. View Details

The brush has very soft fibres, which makes it ideal for very light dusting, and comes View Details

A useful cutting board for dissection and other applications, which is easy to clean, dishwasher safe View Details

In canvas roll case:- 1 No.11 Blades Pk 1 Handle No.4 View Details

Straight with box joint, 225mm length. Spencer Wells stainless steel artery forceps. View Details

10 µL loop at one end with a needle for stab culture at the other. View Details

Flat circular mirror 24mm diameter on 165mm metal handle. View Details

Economical, plastic tweezers, ideal for science and as an assembly aid for small components. View Details

Most suitable for higher level students as the experiments are more quantitative in approach. View Details

The kit contains the enzyme starch iodine and all buffers necessary to carry out experiments into the effect of pH and temperature on Bacterial Amylase. Complete with teaching notes. View Details

Ranges: 20 to 280mm/Hg and 40 to 200 pulses/min. Powered by 4 x AA batteries (supplied). View Details

The Lsskenya is a fully automatic, clinically validated and excellent value for money blood pressure View Details

Supplied in a zip case. Scale reads up to 300mm Hg View Details

Uses a universal reusable mouthpiece. Comes with instructions, a self monitoring chart and a storage container. View Details

Includes Bell jar, single hole bung, 'Y' shape adapter to fit in to bung, balloons View Details

Translucent, natural colour sheet. Dimensions (L x W x D): 1m x 1m x 0.25mm. View Details

A 2 x lifesized model for demonstrating dental hygiene and tooth care. View Details

Cell with two counting grids, separated by a central trough, divided into 400 squares View Details

Model eye enlarged 3 times, with 9 parts in bony orbit. View Details

Hair follicles with sebaceous glands, sweat glands, receptors, nerves and vessels. View Details

The gas evolved can be measured using the calibrated capillary tube View Details

The feed screw has a 1mm pitch and a wide milled flange so that the embedded material View Details

Supplied with coarse and fine mesh. Horizontal support rod and bosshead included. View Details

Aluminium tray supplied with wax. Size: 300 x 200 x 45mm. View Details

A plant shoot is sealed into a stopper which fits the end tube and the whole apparatus View Details

Made of softwood for ease of use with dissecting pins and scalpel blades. View Details

Suitable for use with transmitted light microscopes. For use together View Details

Set of 12 glass microscopeslides. (1000x magnification microscope is required to view some samples). View Details
.jpg)
Essential for studies on geotropism and phototropism on seedlings, cut shoots View Details

A compact unit for comparing rates of absorption or evolution of gases by small organisms View Details

The eyepiece is a x10 widefield eyepiece with an integral measuring scale. View Details

Includes detailed teacher and student guides that provide extensive background information View Details

Set of 9 glass microscope slides illustrating chromosome division in animal and plant cell View Details

Lsskenya Using a reaction timer, students can measure response time to various stimuli including light, sound and touch. View Details

The model is approx. 10cm tall when jaw is closed Made from hand painted View Details

Featuring nucleus, endoplasmatic reticulum, mitochondria, Golgi View Details

Dimensions 22 x 22mm Square. Pre-cleaned cover glasses. View Details

Mounted on base. Showing V.S. of flower. View Details

Also available as part of the Plant and Animal Cell Model Activity Set. View Details

Students will create an artificial kidney model to filter simulated blood. View Details

An electron microscopic structure, showing a portion of wall removed to show ectoplast, tonoplast, vacuoles, endoplast, nuclear structure, plastids, mitochondria etc. View Details

Mounted on base. Model showing the cross section of the tissue structure View Details

Model of monocot root showing internal details in transverse section. View Details

Slides are held upright by the grooved interior. Cap features a built in seal ring making this propylene jar View Details

Dicot stem cross-section with slice removed Cross-section is molded View Details

Curved, stainless Steel, overall length 110mm Stainless steel, fine point View Details

Blunt End, Stainless Steel, overall length 125mm Stainless steel, closed shanks View Details

Two flexible strands signifying alternating pentose and phosphate units attach View Details

Groove is smoothly adjustable in width for various sizes of insects up to 12mm. View Details

Consists of a 4 white coated steel rods 0.5 m long with markers at 0.25 m View Details

This is an excellent model to study the structure. Mounted on base. View Details

The model is extremely detailed, including a different coloration of the costal cartilage View Details

Size 75 mm x 1 mm. Heparinised - Sodium Coated. View Details

Steel cup and rod held by cork in aluminum cap, length 35 cm and diameter of cap 90 mm cup 18 mm
Note:
View Details
The box contains a smoke cell, cylindrical condensing lens and a 12V, 3W festoon bulb.
Note:
View Details
Included in the pack are two-way mirror film, live edge acrylic, smart image film
Note:
View Details
Comprised of the following components: Liebig Condenser Receiver adapter
Note:
View Details
A selection of materials in the form of rectangular blocks intended to familiarise the student
Note:
View Details
The glass unit has two connected limbs, each of approximately 50ml capacity
Note:
View Details
Equipment specifically designed or selected for use in microscale applications
Note:
View Details
The Micro centrifuge is ideal for your laboratory if you are looking to do the following; DNA extraction
Note:
View Details
Supplied with 600mm rod. Metal stand with support clamp for use with Hoffman's Voltameter.
Note:
View Details
The shape of the foil exposes as much metal as possible to the reactant (water).
Note:
View Details
Facilitates clear comprehension of the atom's structure and such important concepts as atomic numbers
Note:
View Details
The two stainless steel electrodes are heavily insulated and the two electrical
Note:
View Details
Borosilicate glass. Joint Size 19/26.
Note:
View Details
With the global population spending over a half a billion dollars a year on commercial antacids
Note:
View Details
Aspirin is to this day the most widely used painkiller and largest selling non-prescription
Note:
View Details
Mounted on base with terminals. Platinum electrodes with two graduated test tubes
Note:
View Details
The movements of the spheres are seen to be random both in direction and extent.
Note:
View Details
Comprises: plastic tank with lid, test tube stand, 5 test tubes 150 x 24mm with stoppers, thistle funnel
Note:
View Details
Narrow jacket for efficient cooling. Borosilicate glass, inner tube integral with body.
Note:
View Details
Bright yellow Crime Scene Tape for use in forensics crime scene lessons.
Note:
View Details
Test metals for corrosion. Measure oxygen consumption during metal corrosion.
Note:
View Details
Each swatch is a different colour and a key card is included in the pack.
Note:
View Details
This high grade plate is designed to the dimensions of standard 96 well and 48-well plates.
Note:
View Details
The vortex mixer also has specially designed vacuum suction feet to ensure stability
Note:
View Details
Often, during a criminal investigation, police and crime scene investigators must use all available tools
Note:
View Details
Burette clamps are cork lined, and funnel holders are slotted.
Note:
View Details
Suitable for 12mm diameter retort rods only.
Note:
View Details
The holder contact screw has a socket for connecting 4 mm safety jacks. O.D. 25 mm, I.D. 12 mm.
Note:
View Details
Electrical contact is made through the crocodile clips and a piece of insulating material between the electrodes prevents short circuiting.
Note:
View Details
The apparatus consists of a heavy-gauge copper outer vessel, which acts as the positive electrode
Note:
View Details
Dimensions (Diameter x W x H): Arms 13mm x 80 x 100mm.
Note:
View Details
Dimensions (Diameter x H): 65 x 50mm. An aluminium block with an angled hole drilled to accept a thermometer (not included).
Note:
View Details
The Bright Classroom Kit provides a complete set of the Bright range of products for school science classrooms.
Note:
View Details
A low maintenance 3-in-1 plastic electrode with integrated temperature sensor
Note:
View Details
Compact, waterproof pocket meter with a dual display showing pH and °C.
Note:
View Details
A bench pH meter which is stable and easy for students to use.
Note:
View Details
These round electrodes will fit the electrode holder, the electrode connector and rubber stoppers with a hole.
Note:
View Details
Shade 9 welding filter lenses, as recommended for safe viewing of burning magnesium etc.
Note:
View Details
Set includes brass, iron, copper, aluminium, hardwood (beech), softwood (pine), nylon, PVC and acrylic.
Note:
View Details
The design allows for easy storage and removal of the burettes.
Note:
View Details
This has to be the best signal/function generator available for educational use. View Details

Ideal for circuits where a high current is required at low voltage. View Details

The output amplitude is continuously variable from zero to maximum 8V peak to peak View Details

The frequency is displayed on an LED display. All connections are via pairs of labelled 4mm sockets View Details

This excellent quality Ripple Tank kit provides a comprehensive demonstration View Details

This Lsskenya meter is capable of measuring energies from 1 mJ to 9999 J or power from 1 mW to 200 W View Details

It is complete with integral lead and BNC connector. This GM tube does NOT have a built-in anode resistor View Details

The polished stainless steel sphere is mounted on a stainless steel rod. View Details

A 50W fully sheathed 12V 5A AC or DC heater with 4mm sockets. View Details

The trolleys may be stacked on top of each other by the use of pins (supplied). View Details

An alternating magnetic field passing axially through the coil will induce an e.m.f. View Details

An optical bench kit that fits in a suitcase. The complete kit, including the bench itself View Details

It comprises a 10 W RMS (20 W PMPO) 8 Ω impedance speaker in a robust beech wood View Details

The input is fed to a coil which is mounted within the field of a cylindrical permanent magnet. View Details

For rods with max. diameter 10mm. Useful as stand for discharge sphere. View Details

Finished in stoved enamel, it is designed to accept 10mm diameter rods. View Details

Temperatures in the range 25 to 600ËšC can be used. 6 felt pads are supplied View Details

The set contains four element specimens: copper, iron, zinc and aluminium View Details

This dual channel oscilloscope offers exceptional value in terms of price and performance View Details

Crystal microphone mounted in a moulded plastic box with 4mm connection. View Details

Minimum PC Requirements: Pentium (R) 4 2.4 GHz processor; 1GB memory; 1GB minimum disc space; View Details

Diameter of largest Orbit 380mm. Requires 2xAA batteries to light the sun. View Details

A model showing the Sun, Earth and Moon, correctly geared to show each month View Details

This ratemeter/geiger counter is a battery operated portable GM-counter View Details

Components mounted on sturdy panels for ease of use and storage. View Details

Used to demonstrate force exerted by atmospheric pressure. View Details

Spare components for Circuits Kit. Components mounted on sturdy panels for ease of use and storage. View Details

This miniature Light Dependent Resistor is housed in an epoxy package. View Details

Glass faced on one side in aluminium case. Dial marked with the cardinal and ordinal points of the compass. View Details

Comprising an upright 100mm high with V-shape slot to hold a convex or concave lens View Details

Can be used with PP3 batteries or press stud type battery holders. View Details

The tolerance of the resistance values is 5%. However, as is quite common, resistances can be closer to their nominal values. View Details

A set of twelve metal strips for magnetism experiments. Each strip is stamped with a key letter View Details

Wound with insulated copper wire and provided with barrel connections for use with 4-6 volts DC. View Details

The poles and blades are made of brass to ensure good electrical connections. View Details

The Lsskenya Student Joulemeter is designed specifically for student use. View Details

Set of 6 cylinders: Brass, Lead, Copper, Iron, Aluminium and Zinc. View Details

Provides 1.5, 3, 4.5 and 6 Volts DC power and has 4mm sockets for safety. View Details

This magnet could be use to clean up nails or screws or used for science demostrations. View Details

Vertical stem with base, zero offset rod, horizontal balance arm with equidistant holes to set the scale pans. View Details

Consists of a sealed syringe mounted on wooden platforms. When loaded with different masses the air inside is compressed. View Details

The light source is mounted under an adjustable lid, designed so that minimum light emerges in unwanted directions. View Details

Components mounted on sturdy panels for ease of use and storage. View Details

Colour coded with 4mm socket terminals for ease of connection. View Details

Comprises a sturdy baseplate with tap, glass bell jar and detachable battery operated bell. View Details

The dots are produced at a rate of 50 - 60Hz depending on the mains frequency. View Details

Large LCD screen for easy reading. 0-20V DC. Digital voltmeter featuring a light and portable design. View Details

The dots are produced at a rate of 50 - 60Hz depending on the mains frequency. View Details

Press stud type are compatible with a standard PP3 battery clip. View Details

Heat sensitive thermochromic paper changes colour as the temperature rises View Details

Metal Density Cubes – 20mm Side Set of 6: Brass, Lead, Copper, Zinc, Aluminium & Iron. View Details

Consists of a brass ball and a brass ring, each individually mounted on brass rods with wooden handles. View Details

General purpose scaler-timer, suitable for radioactivity counting utilising a GM tube View Details

The Generator consists of a conducting sphere supported by a plexiglass pillar and a rubber belt View Details

The apparatus comprises a metal frame holding six capillary tubes of different bores vertically in a trough. View Details

Illustrates magnetic repulsion forces. A set of 5 ceramic magnets, of 32mm external diameter. View Details

One edge labelled 0-100cm left to right, the other edge in reverse. View Details

With an easily selectable range of 11 preferred capacitors from 100µF to 1uF. View Details

The outer vessel is fitted with a detachable clip-type thermometer support. View Details

The two flat sides make the motor ideal for mounting on a PCB. View Details

Mounted on a metal stand the 180mm diameter disk is driven by a belt with the help of the hand driven wheel. View Details

It can be used to produce positive gauge pressures up to 2atm. View Details

Show how passing a magnet through a complete loop causes the device to move. View Details

With parallel sides and rolled rim, without stirrer. 75 x 50mm dia. View Details

More advanced variations on principles relating to pressure and liquids can also be explored. View Details

Comprises a 200 x 15mm strip of brass and steel rivetted together with heat resistant rivets and mounted in a well-finished wooden handle. View Details

Under correct conditions the spark will travel 50mm in air between electrodes. View Details

The dry battery cell is fixed to stand from the bottom side. Designed for measuring resistance in electric circuits. View Details

A constant volume and pressure can be delivered to the apparatus enabling more accurate results to be obtained. View Details

Non-magnetic metal pillar with carbon steel point. On stable base, of overall height 110mm. View Details

The Lamp is supplied with a bayonet socket for standard, clear, incandescent 12V/35W lamps View Details

The capillary tube measures 80 mm length x 6 mm diameter. View Details

A metal punch is then gently rested point down on the sample and a weight is dropped down the drop tube View Details

With tough plastic frame. Mounted in 50 x 50mm slide holders. View Details

These round, unmounted, optically worked glass mirrors are premium quality View Details

This simple wave demonstrator rotates a set of cams that raise and lower 24 vertical rods with plastic View Details

Pan Balance Scale Demonstration Lever - Low friction pivot, 10.6" (27cm) tall. View Details

Made of particle board and wooden componets. 6 1/2" by 3 1/2" base and 16 1/4" tall. View Details

Mounted on a metal stand the 180mm diameter disk is driven by a belt with the help of the hand driven wheel. View Details

Each block is drilled with two holes, a large central hole 12.5mm diameter for a special immersion heater View Details

To demonstrate relative thermal conductivity of brass, copper, aluminium, iron and stainless steel. View Details

Gentle heating at the centre melts wax placed in the cups at the end of each strip. View Details

45 mm diameter. Small brass Compass in metal case. View Details

Removable leads. 9 volt battery powered. 7 functions and 19 ranges Covers AC or DC voltage View Details

The meter can be used to demonstrate the working principle of AC or DC ammeters or voltmeters View Details

Length: 50mm Cable Length: 300mm View Details

Resistance is dialled up in decades and a pair of 4mm spin free terminals View Details

Open sided frame with hooks at each end carrying pulleys with ball bearings. View Details

Diameters 25, 38 and 50mm. The open side frame allows for quick and easy stringing up as no threading is involved. View Details

Rotary displacement can be measured on the scale as the behaviour of the light transmission is studied. View Details

Magnetic Field Demonstrators: A round coil that provides the field pattern of 2x conductors passing through a surface View Details

With dual scale, 0-12.5cm x 0.1mm. Imperial scale graduated to 5 x 1/128 inches. View Details

Range 0-25 x 0.01 mm, supplied in case. Accuracy at 10mm is +/- .003mm. View Details

Frequency Range: 31.5Hz, 80000.0 Hz Response: Fast/slow selectable Display Backlight: LED Backlit View Details

Three-pronged brass table with three pointed legs carries a vertical main scale View Details

The Energy Transfer Kit consists of a number of separately available units which enable the user View Details

Easy-to-use kit demonstrates N & S pole, levitation by repulsion, strength and distance View Details

The durable polymer tabletop carries an angle scale with 0.5° divisions, marked every 10° in both rotation directions. View Details

Beaker Brush An extra-large brush ideal for cleaning beakers.
Note:
View Details
Fibre glass yarn to resist direct flame. Silicon sleeve for temp upto 280° C.
Note:
View Details
Beakers Euro Design are moulded in polypropene, have excellent clarity and extremely sensible chemical resistance.
Note:
View Details
Uniform wall thickness & ideal for heating liquids. Clear metric Graduation for convenience.
Note:
View Details
Large labeling field that enables easy marking. Specially designed for Tablet disintegration machine.
Note:
View Details
Highly resistant to chemical attack. Large labeling field for easy marking.
Note:
View Details.jpg)
Raised graduation for easy reading. These jugs are clear & autoclavable.
Note:
View Details
Large labeling field for easy marking. Highly resistant to chemical attack.
Note:
View Details
Made of Polypropylene. Size:- 75mm Inside 75 Stem Length 77 PP. 100mm Inside 100 Stem Length 95 PP.
Note:
View Details
Made from thick wall and comes with bidded rim. Printed in white color enamel.
Note:
View Details
Stopcock Type:- Needle Valve Bore :- 2.5mm, 4mm, 6mm
Note:
View Details
Stopcock Type:- PTFE Bore:- 2.5mm, 4mm, 6mm
Note:
View Details
Stopcock Type:- Solid Glass Bore:- 2.5mm, 4mm, 6mm
Note:
View Details
With Drip Stem. Stopcock Type:- PTFE Bore:- 2.5mm, 4mm
Note:
View Details
Made of Polypropylene. Two tapered wedges ensure firm grip on Rods having dia 1/2″ or 3/8″.
Note:
View Details
Funnels are typically product of stainless steel, aluminium, glass.
Note:
View Details
With 60° bowl angle for precise fitting of filter paper. Stem length approximately 150mm.
Note:
View Details
Cone Powder Funnel. Available with cone.
Note:
View Details
Comes with fire polished rim and stem. Porosity:- 0, 1, 2, 3, 4, 5
Note:
View Details
Bore:- 2.5mm, 4mm, 6mm Stopcock Type:- PTFE
Note:
View Details
Bore:- 2.5mm, 4mm, 6mm Stopcock Type:- Solid Glass
Note:
View Details
Needle Valve Stopcock. Stopcock Type:- Needle Valve, PTFE, Solid Glass
Note:
View Details
Separating Funnel, Cylindrical, Solid Glass Stopcock. Stopcock Type:- Needle Valve, PTFE
Note:
View Details
Separating Funnel Squibb shape With Graduation, Solid Glass Stopcock.
Note:
View Details
The flasks come with PTFE Key Stopcock and PE stopper. Bore:- 2mm, 4mm, 6mm
Note:
View Details
Lsskenya made of Polypropylene. Non-corrosive front opening provides clear view of the solution.
Note:
View Details
PP stopcock fitted with self lubricating PTFE plug, is push fitted to the stem of funnels.
Note:
View Details
Funnel Filtering, 60° angle with stem Diameter:- 75mm 100mm
Note:
View Details
They are particularly useful if the liquid addition must be low down in the flask where a funnel or dropping funnel would have too short a stem.
Note:
View Details
Pressure Equalising Funnels Pear shape with socket, PTFE Key stopcock and stem with cone.
Note:
View Details
An atomizer is used to dispense something in small Controlled amounts
Note:
View Details
Material : Borosilicate glass Schellbach stripe for accurate menscus reading
Note:
View Details
Material: Borosilicate Glass Transparent acrylic body and a leakproof stopcock
Note:
View Details
With adjustable clamps to hold upto 30 mm, spring type, thumb screw key for retort rods upto 16 mm dia.
Note:
View Details
These are printed in amber color enamel These Burettes are suitable for use in schools and institutional
Note:
View Details
PTFE Needle valve stopcock Material : Borosilicate Glass
Note:
View Details
With Glass Stopcock Material : Bolosilicate Glass
Note:
View Details
Material: Borosilicate Glass Schellbach stripe for accurate menscus reading
Note:
View Details
The screw cap is made from Polyethylene which is Autoclavable.
Note:
View Details
Made from heavy wall which can withstand high vacuum. With Glass Connector.
Note:
View Details
These flasks are ideal for semi-micro distillations. The pear shaped design allows distillation
Note:
View Details
Capacity: 50mL, Socket Size:14/20. Capacity: 250mL, Socket Size:24/40.
Note:
View Details
These are extensively demanded by clients owing to its rugged construction and effective performance.
Note:
View Details
Borosilicate heat resistance glass. Suitable for repeated autoclave cycles at 121°C.
Note:
View Details
This flask is commonly used in chemical labs to separate liquid mixtures by the process of distillation.
Note:
View Details
All glass Flask iodine come with thick uniform wall thickness and are printed with white enamel.
Note:
View Details
Suitable for determination of Nitrogen. Made of Borosilicate Glass.
Note:
View Details
Used for the Determination of Nitrogen. Made of Borosilicate Glass.
Note:
View Details
Side neck at an angle of 25°. Made of Borosilicate Glass.
Note:
View Details
Base Diameters: 166mm Neck Diameters: 50mm Made of borosilicate glass.
Note:
View Details
This flask is extensively utilized in laboratories for admixture, heating and boiling of chemicals. With beaded rim
Note:
View Details
Made From Heat Resistant, Low enlargement Borosilicate Glass.
Note:
View Details
Made From Heat Resistant, Low Expansion Borosilicate Glass.
Note:
View Details
The apparatus comprises one variable speed centrifugal pump and one fixed speed centrifugal pump
Note:
View Details
An adjustable spear valve directs a jet of water through a nozzle to the buckets of the Pelton wheel
Note:
View Details
The ram pump is not a normal mechanically-operated pump. A column of water in the supply (drive) pipe
Note:
View Details
Instrument and control modules fit into a frame above and behind the pump. An electronic Motor Drive controls the pump speed.
Note:
View Details
Instrument and control modules fit into a frame above and behind the pumps. Each pump has an electronic Motor Drive to control its speed
Note:
View Details
The equipment consists of three Bourdon gauges mounted in a robust panel.
Note:
View Details
A radial section gate for experiments to demonstrate the head/flow and discharge
Note:
View Details
A sluice gate with ten tappings across its face. For use with an Flume, not included.
Note:
View Details
The apparatus includes a holder and three standard notches, one rectangular and two “V” notch.
Note:
View Details
The spillway comes in four parts: the spillway, detachable ski jump and plain apron
Note:
View Details
The siphon passes a mixture of air and water. A clear acrylic, self-regulating siphon that demonstrates the automatic adjustment of its discharge over
Note:
View Details
The apparatus is used to observe the increased flow velocity and the streamline curvature between the piers
Note:
View Details
The small grade gravel being 2-5 mm and large grade 10 mm.
Note:
View Details
Enabling the observation and calculation of both open and orifice flow in a culvert.
Note:
View Details
Allows variable control of wave frequency, as well as manual adjustment of amplitude.
Note:
View Details
Sediment (sand) is placed in the vessel where there is a pump that can pump sediment
Note:
View Details
The equipment is designed primarily for use with Volumetric Hydraulic Bench
Note:
View Details
Pressure Measurement Bench enables students to fully investigate and compare the operation and characteristics
Note:
View Details
The nozzle flow meter (included) or any of the optional flow meters quickly and easily fit into place
Note:
View Details
The equipment has three water circuits with instruments, pipes and pipe system components. These allow students to examine and compare the different component characteristics.
Note:
View Details
A precision micrometer head allows the user to accurately adjust the position of the Pitot tip
Note:
View Details
This flow meter quickly and easily fits into place between the adaptors in the base unit
Note:
View Details
The apparatus includes a horizontal Venturi tube, a downstream flow-control valve and manometer tubes.
Note:
View Details
The Discharge over a Notch apparatus shows clearly the use of weirs as simple flow regulators. It works with and fits on the top of Digital Hydraulic Bench.
Note:
View Details
Determination and analysis of the stability of floating bodies, such as ships, rafts and pontoons
Note:
View Details
The bench has a reservoir that supplies water for the experiments. A tank on the unit can be filled from the reservoir for experiments
Note:
View Details
The apparatus is a Bourdon gauge connected to a dead weight tester.
Note:
View Details
When the test sphere reaches the bottom of the tube, it enters a valve that the students turns, dropping the sphere
Note:
View Details
The cylindrical sides of the quadrant have their central axis coincidental with the moment measurement axis.
Note:
View Details
Cavitation in a Venturi Unit is a purpose-designed teaching unit which enables efficient and effective
Note:
View Details
A low-voltage, variable-speed motor rotates the vessel about its vertical axis. A speed-control unit (included), sited away
Note:
View Details
The circuits are made of small-bore copper pipe, commonly used in a wide variety of applications
Note:
View Details
A useful diagram on the apparatus shows the main dimensions of the pipework
Note:
View Details
Four wheels allow the user to move the bench around the classroom. Two wheels have foot-operated locks to hold the bench in position.
Note:
View Details
Static pressure tappings upstream and downstream of the test pipe connect to a water manometer
Note:
View Details
The rear panel is translucent, with back lighting to improve observation of settling sediments in the columns.
Note:
View Details
The tank is clear so students can see the flow patterns. The sides are plate glass to resist abrasion from the permeable medium.
Note:
View Details
In the middle of the catchment area are two ‘wells’ for experiments with water wells.
Note:
View Details
Jet Trajectory and Flow Through an Orifice apparatus allows students to measure: Decrease in flow
Note:
View Details
Flow through an Orifice apparatus allows students to measure: Decrease in flow Energy loss
Note:
View Details
To understand correctly how a turbine (a Pelton wheel for example) works, students need to understand how jet deflection
Note:
View Details
A bypass valve discharges to waste at the inlet end of the pipe.
Note:
View Details
It has two parts: the electric dynamometer, and a motor drive and display unit.
Note:
View Details
Centrifugal pumps are common machines used to move water and other fluids
Note:
View Details
You connect the outlet of the centrifugal pump to your turbine. As the pump forces water through the turbine
Note:
View Details.jpg)
The Pelton Wheel has a variable spear jet at its inlet. This allows students to understand the effect
Note:
View Details
The turbine has adjustable guide vanes that control the water flow in the turbine.
Note:
View Details
For use with the Universal Dynamometer, the Axial Flow Pump Module is part of Lsskenya Modular Fluid Power range.
Note:
View Details
The piston pump is a positive displacement pump. It has twin vertically-opposed pistons
Note:
View Details
The gear rotation generally determines the flow direction, but you only test the pump in one direction, determined by the Universal Dynamometer.
Note:
View Details
The Work Panel has its main panel and two supports. All are made from thick perforated metal
Note:
View Details
This kit also includes a wheel and axle with single, double and triple wheel or sheave pulleys
Note:
View Details
The kit introduces students to key engineering terms such as gear ratio, pulley ratio and efficiency.
Note:
View Details
This kit includes a screw jack, a wedge and different bearings.
Note:
View Details
The trolley allows one person to push all the trays from one room to another. It has extra space on top
Note:
View Details
The kit reduces the need to order the small parts that may become misplaced during use.
Note:
View Details
Identical to those used for the kits, so they fit and stack in the same way. A set of five trays and lids.
Note:
View Details
A versatile hydraulic engine test bed with comprehensive instrumentation. The equipment requires minimum services, installation and outlay.
Note:
View Details
The engine is mounted on a sturdy precision bed plate. The bed plate has dowels and slots
Note:
View Details
In addition, each engine includes a colour-coded fuel tank with self-sealing couplings.
Note:
View Details
The main components of the Exhaust Gas Calorimeter are: Instrumentation unit
Note:
View Details
Crank angle shaft encoder for use with Engine Cycle Analyser to measure the angular position
Note:
View Details
Fuel enters the pipette from the tank. The fuel supply from the tank is then cut off via a valve so that the engine draws fuel
Note:
View Details
A steel frame holds a gas generator, power turbine, combustion chamber, oil and fuel tanks, pumps, ancillaries and guards.
Note:
View Details
The Spring Testing Apparatus uses a fundamental variable mass and scale measurement to test springs.
Note:
View Details
The main part is a rigid metal frame. Supplied as standard are two adjustable knife edges that work as simple supports
Note:
View Details
The set includes a magnifier with graticule (measurement scale) and test specimens made of basic engineering materials.
Note:
View Details
The main parts of the equipment are: A ball indenter for Brinell hardness tests An extensometer with a digital display for tensile
Note:
View Details
The Double Shear Experiment fits in the area below the loading platform of Universal Testing Machine.
Note:
View Details
A steel frame with four columns supports a hydraulic ram. The ram pushes up a loading platform.
Note:
View Details
The hand-held magnifier has a measurement scale for accurate measurement of the dent.
Note:
View Details
Two metal bosses hold the spring securely in the testing machine, which compresses the spring.
Note:
View Details
The spring is of the same heavy-duty design as those used in vehicle suspensions.
Note:
View Details
The load application mechanism includes a hand-driven worm-and-wheel gearbox, driving a lead screw
Note:
View Details
An essential ancillary to the Brinell Hardness Test Set, this Compression Cage fits
Note:
View Details
The apparatus consists of a main unit, an instrumentation unit and a power supply.
Note:
View Details
The machine is provided with a four-digit LED display. It is used to display measured hardness results
Note:
View Details
Students mount a test beam vertically in a frame. The top of the test beam fixes to a holding ring that can rotate through 360 degrees.
Note:
View Details
The Beam Apparatus allows an extensive range of experiments to cover virtually all course requirements relating to bending of beams.
Note:
View Details
Its main part is a simple lever (load beam) with a mechanical advantage of 8:1. The load beam gives a steady and uniform tensile load.
Note:
View Details
The Digital Strain Display accepts up to 16 channels from strain gauges connected in quarter, half or full bridge.
Note:
View Details
The apparatus consists of a thin-walled aluminium cylinder, held in a robust frame.
Note:
View Details
The compact Strain Gauge Trainer fits on a bench or desktop. It contains everything needed to show students how resistance strain
Note:
View Details
Primarily intended as a convenient form of general purpose kit, it will prove particularly valuable to
Note:
View Details
The Torsion Testing Machine is a compact machine, ideal for classroom demonstrations and for safe use by small groups of students.
Note:
View Details
A variable speed drive controls the motor to allow safe and gradual increase of the cycle rate.
Note:
View Details
The PSS has a motor and generator set to simulate power generation. This set has characteristics similar to industrial turbine and generator sets
Note:
View Details
The motor and generator set consists of two coupled machines mounted in the base of the control console.
Note:
View Details
The lower panel has a double bus: a main bus and a standby bus or ‘reserve bus’.
Note:
View Details
The prime mover and generator set is two coupled machines mounted on a common bed-plate in the base
Note:
View Details
The Transformer Trainer module fully examines single-phase and three-phase power and distribution transformers.
Note:
View Details
The configurable simulated transmission lines allow realistic studies of short, medium and long-distance
Note:
View Details
The console has two working sections: An upper panel that shows the basics of distribution, and A lower panel that shows more advanced
Note:
View Details
The test set allows students to compare individual relay characteristics. It also allows connection of two relays for experiments such as relay discrimination.
Note:
View Details
The control panel has clear mimic diagrams with shrouded sockets. Students use shrouded leads
Note:
View Details
A variable transformer inside the unit works with the load to set and control the fault current in each of four circuits.
Note:
View Details
The transformer has a selection of high-voltage (primary) and low-voltage (secondary) tappings
Note:
View Details
Each transformer has a selection of high-voltage (primary) and low-voltage (secondary) tappings
Note:
View Details
The relay is housed in a robust enclosure with carrying handle. The module mounts on the desk area of the Protection
Note:
View Details
The relay shows clearly the characteristics of three-phase differential protection.
Note:
View Details
The relay is housed in a robust enclosure with carrying handle. The module mounts on the desk area
Note:
View Details
This relay is also an optional ancillary for selected products in Lsskenya Power Systems range.
Note:
View Details
The load bank includes three separate banks of resistive, inductive and capacitive loads.
Note:
View Details
Each bank has a set of switches to bring each resistor into circuit. This allows students to create and study
Note:
View Details
• pipe Capacity:49/16 Inches. • Overall Length: 12Inch. View Details

Max rotation of disc 2800 rpm. Max cutting thickness 120mm. View Details

Maximum Load capacity 140 kg. The machine has fixed amplitude. View Details

Heavy-duty rubber shock mounts cushion vibration to the operator for greater comfort. View Details

In One Pallet- 4 brick will be done Total Power Required: 31.5 HP Conveyor 20-foot length View Details

Tires Four wheels 12.5-16. Turning radius (m) 4.5. Diesel engine, 40hp, water cooling, 30kw/2300rpm. View Details

Extended Height: 2.7m Platform Height: 0.95m View Details

Conical rotor, Squirrel Cage, 1 hr. Rated, Class 'F', Insulated crane duty motor. View Details

Ideal for the internal compaction of concrete specimens both in the laboratory and in the site View Details

Table Dimensions 600 x 500 mm, water tank capacity 55 ltr, for cooling the blade while cutting View Details

Galvanized machine table Foldable legs Bayonet mounted rear table View Details

Max. torque 30/13 N Percussion drilling machine View Details

For drilling and chiseling complete in box pointed short View Details

Min. capacity in concrete 20mm Single impact energy 1.8 nm View Details

Blade length 200 mm Shearing capacity for round bars: 16 mm, min. View Details

Transparent 20 meter long hose with armatures. Flexible. View Details

Speed of grinding wheel 3000 rpm min. 580 watt View Details

This drilling machine is tested on various quality parameters. View Details

4 color threading guide Presser foot pressure adjustment View Details

These are manufactured from best quality material at state of art infrastructure unit. View Details

These sewing machines are quality approved by professionals on multiple steps to let users have best sewing solution. View Details

In addition to this, our products are tested on various parameters by our quality controllers. View Details

Lsskenya Light Material, Medium Material, Heavy Material. Applicable View Details

These are highly efficient and made of high-end technology. Offered Button Attachment Sewing Machine is accurate in dimensions and very easy to use. View Details

The machine is suitable for straight seaming, embroidery, abutted, bar tacking, over-edge seaming, zipper inserting seaming View Details

Roll Ironer to go against a wall. Anodized aluminum bed. View Details

With the assistance of our skilled professionals, we are engaged in offering qualitative Industrial Washing Machine. View Details

All our products are made to undergo various types of tests and verification to ensure its authenticity before being supplied to our customers. View Details

Highly skilled and experienced professionals assembled these generators by making use of quality proven View Details

Our steam boilers offered at highly competitive market prices to our esteemed clients. View Details

Excellent in performance, these boilers are manufactured utilizing superior-grade materials that are checked thoroughly to ensure flawlessness. View Details

Our offered boiler is highly acclaimed in the market due to its consistent performance. View Details

The offered Thread Sucking Machine can be availed at industry leading rates. View Details

This Inimitable Extractor completes water extractions up to 95% for polyester in around View Details

To meet the variegated demands of the clients, our company is instrumental View Details

The trolley must have two (2) circuit building plugboards (approx. size) 1100mm x 700mm View Details

The unit should be bench top and self-contained having its own means of pressure generation. View Details

The top channel members are used to carry either a single or double acting hydraulic ram Carriage. View Details

The Hydraulic Bench is designed as a portable and self-contained service module for the range View Details

It measured fluid flow rates by using venturi tube and the orifice plate, and velocity of the fluid is calculated in terms of flow rate and pipe diameter. View Details

It consists of two test sections, one for pipe surge and other for water hammer phenomenon. View Details

The circuit and manometer are attached to a support framework which stands on the working top of the Hydraulics Bench. View Details

Self-contained with hydraulics bench, to measure flows and drops in the wide range of pipe network View Details

A mobile self-contained Multi-Pump Test Rig, containing all the services & instrumentation View Details

It also includes a sophisticated three-phase inverter for providing accurate motor speed control, and a second motor drive output, all under software control. View Details

Cavitation Demonstration is a small scale apparatus designed to demonstrate Cavitation utilizing a Hydraulics Bench. View Details

Use:- For Compression & Tension Tests Machine For Tensile Test (500Kn) And Compression Test (2000 Kn). View Details

It consists of a steel vessel of 55/ 110 Litres capacity, mounted on a frame. View Details

The slump cone has internal dimensions 20cm. dia at base 10cm. top dia. and 30cm height. View Details

Use:- Testing Concrete water permeability. View Details

Reinforcement depth measurement Bar size can be preset if known or detected automatically for survey and investigation tasks. View Details

The water-holding characteristics of the sample can be determined. View Details

Use:- Measurement of density and specific density, standard weighing. View Details

Uses:- Specific gravity, Absorption of fine and coarse aggregates, Silt determination. View Details

Lsskenya offers a complete Organic Impurities Test Set with or without sodium hydroxide reagent or individual set components for your convenience. View Details
.jpg)
Used for the precise division into two representative portions of materials. View Details

The machine consists of a rolled steel drum having an inside dia. of 711 mm and internal length 508 mm. View Details

The Pendulum is mounted on antifriction bearings. On release, the pendulum swings down View Details

Exterior body is made of high-quality steel sheet with a novel appearance. Temperature control protection. Digital display. View Details

It consists of a load frame for applying loads up to 56 KN, on which a manual hydraulic jack is mounted. View Details

We are the manufacturer of all type of Centre Lathe Machine. Such as Light Duty, Medium Duty View Details

One piece construction with 100% clamping power. View Details

Six knurls Tool is provided with one pair each of fine medium and coarse knurls View Details

Shiny Black Finish. Double Ended one piece boring bar View Details

Tool Holder is 3-15/16" long including the insert, insert is fully adjustable. View Details

Our clients can avail from us a premium quality range of Thread Gauge, which is widely accepted for their reliability. View Details

Made of spring-tempered steel. Satin Chrome Finish. View Details

Blades Size: 0.04 millimeters to 1 millimeters. Weight: 125 grams. View Details

Table:- Distance between t slot: 57 mm Angular swivel: 22 deg View Details

Universal Dividing Heads for Tool Room and Production applications.. View Details

This range is extremely proficient in making our customer's satisfaction level to the highest by offering a peerless quality array. View Details

360º Rotating Pump Provides Flexibility For Using the Puller in the Most Convenient Position. View Details

Tool for special purpose machines, application based. Material: SS and MS. View Details

The LM Arbors are mounted on machine Spindles, supported brackets. View Details

Leveraging on our foresightedness and excellent managerial qualities, we are instrumental in manufacturing View Details

Our machines are acknowledged for their attributes such as compact design, portability, high effectiveness and low power consumption. View Details

Spindle drive: 1.5 KW to 3.75 KW. These machines are designed for quick flat grinding of workpieces. View Details

Taper of spindle bore: morse number 3 Distance from the center of spindle to the surface of the vertical column: 315mm (12 3/8 inches) View Details

Sustained accuracies over a long period, low maintenance and ownership cost have given it the optimal mix to become the preferred brand over the last decade. View Details

For dynamic balancing, a moment polygon is drawn using relative weights and angular and axial position of blocks is determined. View Details

The weight of the motor is balanced by another weight, which is on either side of the rotor. View Details

A Variac provided control of driving motor. As the test is destructive, after the test cannot be used, hence the unit only demonstrates the principle. View Details

It consists of 3 white acrylic discs A, B, C. having pitch circle diameter 450 mm, 300 mm & 200 mm respectively. View Details

When we give a rotation in clockwise direction, we can observe that the rack tip will be resisted by the tooth flank thus giving interference. View Details

A Perspex window on top cover helps to visualize the process. Rotameter is used to measure water flow rate through tubes. View Details

The pulleys are mounted on input shaft (Motor shaft) and output shaft. View Details

Two plane gears mesh with the annular gear. These planet gears are mounted on a common arm to which output shaft is fitted. View Details

The weights are Zink Iron for long term use. The system is nickled chrome to protect from rust. View Details

Empirical calculations of these forces can be cross-checked and verified experimentally using these machine tool dynamometers. View Details

This is a simple and essay to understand set up introduce by sharp View Details

A two channel digital force indicator facilitates to measure both forces simulteniously. View Details

With this Dynamometer student can study the change in these forces by varying Speed, Cut and Feed. View Details

With this Dynamometer students can study the change in these force by varying speed, cut and feed. View Details

Working current: 0.6A Cup Capacity: 600ml View Details

Cutting capacity: 24" x 1.5" Size of the machine: 24" View Details

Lsskenya portable electric orbital sander used for sanding polishing veneers View Details

Angle range of saw-spindle can lean: 0-45degree Motor power of lining-saw: 0.75kw View Details

Maximum Cutting Capacity 45° - 45°: 35 x 60 (L) / 40 x 90 (R) mm View Details

Heavy duty adjustable 360o side handle. Robust construction. View Details

The adjustable belt sander sands flat workpieces as well as inside and outside curves, while the disc sander handles smaller workpieces. View Details

Tube Belt Sander Portable Polishing Machine for Stainless Steel Tube Metal Processing Polishing Tool. View Details

Max. cutting depth at 90 Degree: 70mm Max. cutting depth at 45 Deg. : 45mm View Details

We are an acclaimed name in the firm offering highly efficient Portable Jig Saw Machine. View Details

A powerful 1 HP motor drives this heavy-duty machine for all-day dependability. View Details

Hook and loop wrapped drum. Power coated steel base. View Details

Bevel guide fence ensures consistent planing from 0° to 45° through the entire workpiece and has a protective shield covers the section of blade not in use. View Details

Power: 1850 Watt Plunge capacity: 0 to 2-3/8" View Details

A chainsaw (or chain saw) is a portable, mechanical saw powered by a gasoline two-stroke engine. View Details

Power on/off switch. Portable tool. Staple viewing window. View Details

Oven door with Silicon gasket & transparent thermal glass window for watching the samples under drying. Temperature control protection. View Details

Use:- Measuring in soil bearing capacity. View Details

The equipment consists one each of the following:- Circular metal space disc, 148mm Dia x 47.7mm high, with detachable handle. View Details

Use:- Measuring the Liquid limit. View Details

Use:- Measuring liquid limit. View Details

At shrinkage limit, on further reduction in water, air enters into the voids of soils and thus keeps the volume constant. View Details

Use:- For accurately determining the density of gravels and coarse soils. View Details

Our products can be used on any shop floor for shearing sheet metal, bars and rods of M.S., aluminum, and brass. View Details

Circulating System: Drive pump with motor. Plumbing Ports: Overflow; Drain; Inflow and outflow for the cooling system. View Details

The standard outfit comprises of the following items. Loading unit, maximum capacity 20 kg/cm sq. View Details

Water Required 140g (5 oz.) Other Components Loading pistons; compaction hammer. View Details

Use:- For estimating the bearing capacity of shallow foundations and for the design of flexible pavement View Details

Then the core is dug out, trimmed, weighed, dried and the density and moisture content calculated. View Details

The Automatic Soil Compactor from Lsskenya is designed to automatically compact soil samples View Details

The equipment comprises one each:- Gun metal dummy plate to serve as a false bottom during compaction. View Details

Use:- CBR test for determining bearing capacity of soils. View Details

This is specially useful to obtain reliable and accurate results for those soils which have the low plasitcity index. View Details

Use:- Mechanical rolling to determine the plastic limit. View Details

Moisture contents at which soil has the smallest plasticity is called limit. View Details

Rust-resistant construction, three rust-resistant metal prongs for immersing soil pat. View Details

Geotechnical Gauge is a water-resistant 5 x 8in (127 x 203mm) plastic card on a lanyard View Details

Grain Size Chart is widely used by field geologists for describing samples. View Details

Sample Panels. Very coarse; coarse; medium; fine; very fine; silt. View Details

Used to determine the resistance to shearing of all types of soil specimens both consolidated and drained, undisturbed or remoulded samples. View Details

Base and Collar: Cast aluminum construction; brass hold-down rods. View Details

Used to determine the dry density of compact, fine, medium-grained soils and for layers not exceeding 50 cm thickness. View Details

Permeability Test System for efficient and accurate permeability testing of a wide range of construction materials. View Details

Consolidated Drained (CD). Unconfined Compression (UC). View Details

Ideally used in general purpose fabrication and maintenance work, our products are widely appreciated for their excellent performance. View Details

Auto-Adaptive Arc Force minimizes electrode sticking in the puddle. View Details

The cost and maintenance of the welding equipment is low when compared to other welding process. View Details

Safety cut off switch for water flow in transformer and thyristor and inverter. View Details

Our welding machines are incorporated with gas regulators, pre-heaters and MIG torches. View Details

The provided equipment is manufactured using optimum quality components with the international quality parameters. View Details

Min. Cutting Radius (mm): 50 Cutting Capacity Mild Steel (mm): 3.2 View Details

Adjustable Strokes complete with rules at punch and shear end. Swing-away punch stripper. View Details

Clients can avail these machines in various diameters and thickness as per their requirements. View Details

These machines have the ability to work efficiently even in the very low-pressure situation. View Details

Largest dimensions of job held: 500 x 350 mm Longitudinal traverse of table: 500 mm View Details

Designed for testing motor windings and jump-starting compressors that are locked up. View Details

Use:- Welding, brazing and flame cutting of metals. View Details

Six Sensitivity Levels High Volume Pump Blue UV LED Light View Details

This Clamp Meter is an auto/manual ranging, professional meter with Digital Analog Display 4000 count with backlit. View Details

Color coded gauges, valves and hoses. Diagnostic and Service Tool Set. View Details

Spindle by thermal refining, bending hand forged by special steel, parts by stringent quality inspection, superior quality, unified specification. View Details

Power Saving up to 30 - 70%. Good ARC start and arc force. View Details

This machine provides thermal overload protection with indicator light. View Details

Rotatable gear housing rotates 90 for cutting applications. View Details

The arm lifts out of contact of the workpiece in the forward stroke to prevent damage to the blade or workpiece. View Details

Material- MS Strip Type- Wooden Handle Supplied with 300mm Blade View Details

We have authorized automation distributor of Hypertherm to use and integrate Hypertherm Plasma Power source in our cutting machines. View Details

Blade length: 12" Hardened high carbon steel blade View Details

Then applies side loads to form interference bend on the specimen to eliminate remaining deformation View Details

Our range is known for its corrosion resistance, high durability & sturdy design and is offered in various specifications to our clients. View Details

Helmet comes with inside either PVC fitting or ratchet fitting. View Details

Clear goggle meeting requirements for occular safety regulation. View Details

Protection from harmful sparks and hazards. Sizes - 12, 14, 16 inches etc regular. View Details

Heavy chrome leather welders apron with reinforced eyelets and ties. View Details

Product Style: Leather. Material Type: Split cowhide. View Details

Lsskenya, We are offering an excellent range of Flat Files. These flat files are widely appreciated for its perfect finish View Details

The triangular file has a tapered shape and is mounted on a hardwood handle for easy gripping. View Details

These round files are available in diverse specifications from us as per the need of patrons. View Details

Compatible with tapping tees. Aluminum alloy frame for high strength and lightweight. View Details

Hydraulic driven clamping and saw blade movement. Support of water cooling and lubricate system for enhancing the service View Details

We are an eminent firm engaged in manufacturing and supplying a quality approved range of Horizontal Band Saw Machine View Details

A built-in dust chute capable of handling both planing and jointing operations. View Details

Table Size 30" x 32". Spindle Speed 4000 RPM. View Details

Height of centres - 165 mm/6" - 203 mm/8" Automatic Grade - Semi-automatic View Details

Sliding Table Length - 1300 mm Sliding Table Width - 315 mm Spindle Diameter - 30 mm View Details

Tilts table: 300mm Chisel range: ¼”-3/4” View Details

We offer a precision engineered range of tray dryer specially designed for uniform circulation of hot air in the drying chamber. View Details

Heavy-duty cross-cut fence with the quick release. Easy-glide sliding table. View Details

Lsskenya saw Brazing Machine used for brazing the ends of bandsaw blades View Details

Matching up with the requirements of our clients, we are involved in offering Automatic Panel Saw Machine. View Details

Various type of materials can be finished on this machine such as S.S., M.S., Copper, Brass, Aluminium View Details

Material - MS, CI Drilling Capacity (mm) - 38 View Details

Gauge - 16 gauge, 18 gauge. Fastener Range (inch) - 3/4" to 1-3/4", 1-1/4" to 2-1/2", 2" to 3-1/4". View Details

1 Phase Features: Automatic Blade Brake, Rigid Steel Floor Stand wit View Details

An air compressor is a device that converts power (using an electric motor, View Details

Automatic temperature correction. Built-in wood calibration scales. View Details

These are capable of collecting heavy wood dust load, chips, and shavings efficiently at the point of origin View Details

Horizontal Machine Structure. Electric Power Source. View Details

Dovetail Jig Style: For Cutting “Half-Blind” Jigs Only. Includes 1/2" Template. View Details

Vertical Spindle Moulder. These dust collectors are available in various sizes and specifications. View Details

2 nos. carbide cutter block of size 5" Dia. x 0.875" width. View Details

Our offered rolls are widely acknowledged in the industry, due to their dimensional accuracy, high strength and robustness. View Details

Max. Loading of Worktable: 35 kg Table Travel x-axes: 280mm (11”) View Details

No. of T-Slot on Table : 3 Worktable Size : 400 x 145mm (16” x 5.7”) View Details

Swing over carriage : 110mm (4.3”) Max. Moving Speed of X/Z Axes : 2m/min View Details

With a highly commendable functionality, longer functional life, high resistance to corrosion and market leading rate. View Details

Swing Over Bed: 150 mm Max. Turning Dia: 55 mm View Details

Manual pulse generation Open Loop/ Closed Loop / Double close loop Visual Gcode display View Details

We provide a high quality of CNC Retrofit Kit for Conventional Universal Milling Machine. View Details

Spindle encoder feedback: 1 axis Control output: Clock and Direction View Details

Support straight line magazine, disc magazine, cylinder tool change and magazine features customize. View Details

Lsskenya exclusively designed and developed the Trainer series for learning purpose. View Details

It is a rigid & steady design in its class with high levels accuracy to achieve quality milling components. View Details

Various options make this model a flexible means of production. View Details

This machine which is specifically designed for educational institutes offers hands-on experience of industrial machines View Details

This is the ideal product for educational institutes which are looking to impart industrial training to their students as well as doing some light production activity on the same machine. View Details

The robust machine structure of Spinner 18 supports best surface finish and high metal cutting capability with high accuracy View Details

Customers can avail this system from us as per their necessities at reasonable rates. View Details

It has the equivalent of a shoulder, an elbow, and a wrist. View Details

Hydraulic Components Hydraulic Power pack with following features View Details

Operation of a single acting cylinder with 4/3 way direction control valve. View Details

It demonstrates the design, construction, and applications of Electro-Pneumatic components and circuits. View Details

We have carved a niche amongst the customers for offering bulk PLC and HMI Training Kit. View Details

The desktop machining system with capabilities to produce most anything from very simple View Details

Hole through spindle: 10 mm Spindle nose thread: 3/4-16 T.P.I. View Details

Our CNC Milling machine has high performance and high-speed cutting. View Details

Pitch-metric : 0.2 – 3.5mm Distance between centers: 600mm View Details

Owing to the perfect quality and supreme performance, the offered product is highly appreciated in the market. View Details

We are actively engaged in manufacturing and supplying an excellent range of CNC Drilling Machine. View Details

Precision EDM Machine uses electrical discharges or sparks for obtaining the desired shape. View Details

Rota meter is provided to measure the flow. For understanding the R.T.D. characteristics, a special arrangement to inject View Details

The setup consists of one feed tank through which water is fed to the reactor. View Details

This set-up is used to study a non-catalytic homogeneous reaction under ambient condition. View Details

A bench top unit comprising a vacuum formed ABS plastic plinth with integral electrical console onto View Details

The contact time and reaction temperature can be varied. View Details

The unit may also be used for project work, in particular, to measure the effects on product quality of different process conditions. View Details

The absorption column is designed to demonstrate the basics of gas absorption in the unit operations View Details

Sedimentation is the separation of solid particles from fluids under the gravitational force. View Details

Ultra speed data processing by Network HPLC. Designed for all you need in the lab. View Details

The apparatus uses water as the working medium, contained in a storage tank at the rear of the unit. View Details

The ascending force of this steam produced during the boiling causes liquid and vapors to flow upwards in parallel flow. View Details

The equipment consists of a ten-liter reactor vessel mounted on a vacuum formed the plastic base View Details

The fundamental principle of solid-liquid extraction Unit can be learned with the temperature of the solvent can be adjusted. View Details

Fluidisation and Fluid Bed Heat Transfer Unit takes place within a transparent chamber and the range of bed material supplied can be rapidly changed. View Details

Lsskenya uses high pressure and extraction phases to achieve a rapid extraction of the active materials View Details

Connection to cooling water and a suitable electrical supply is all that is required for normal operation. View Details

The experimental set up consists of a metal bar, one end of which is heated by an electric heater while the other end of the bar projects inside the cooling water jacket. View Details

No. of Turns 15 Coil Tube Dia OD 21mm, ID 17mm (Approx.) View Details

Some of the other strengths of the system comprise circulation pump with 15 LPM capacity, microprocessor-based PID View Details

The test section is connected to Piezometer Tubes through pressure tapping at different locations on the section to demonstrate the Bernoulli’s Theorem. View Details

A small ship model having provision to put the load on the deck or at the base and an arrangement View Details

A capillary tube is introduced centrally in the bell mouth. To study different types of flow. View Details

This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition. View Details

The entire set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under isothermal condition. View Details
.jpg)
The set up consists of two feed tanks through which two reactants are fed to the reactor. It is a helical coil tube type reactor. View Details

The temperature of the bath can be maintained from ambient to 90ºC with the help of Digital Temperature indicator Cum Controller. View Details

These Hospital Plane Bed are durable and comfortable. View Details

Lsskenya have kept tabular head & foot of the beds at unequal heights with vertical tubes supports. View Details

Lsskenya offers convenient transfer of patient from bed to trolley and vice-versa. View Details
.jpg)
Side rail has a 1 hand drop side mechanism which allow safety as well as anyone to access the baby with ease. View Details

The frame is sturdy and the structure is specially designed in these couches to make them View Details

Lsskenya Double Fold stretchers designed with CRCA frame round tube folding View Details

It comes with 4 or 7 wheel, oxygen cylinder cage, tray for instrument and I.V. rod attachment View Details

The structure is made of pure stainless steel and all the part are well finished so that the trolley itself does not cause any trouble. View Details

It has epoxy powder coated or SS finish. It has detachable side rails and standard View Details

It is provided with lithotomy bars. Standard size of 72 x 30 x30 View Details

This multi purpose table is designed to provide perfect solution for various type of surgery including major operations. View Details

They have an attractive walnut wood-grained laminate top with a T-molded View Details

Rectangular CRC tubes mounted on 5 cms castors, height adjustable by side Knob. View Details

Lsskenya Mounted on 100mm dia revolving castor wheel. View Details

It comes with two SS Shelves, top with three side railings. View Details

The CRCA tube structure make them sturdy and the coasters attached at the bottom View Details

Lsskenya Designed in a style to maximize patients comfort and independence. View Details

These trolleys are also known as Oxygen cylinder Stand, as they can be stationed View Details

It has pre-treated powder coated finish. It is also available in stainless steel. View Details

It has pre-treated powder coated finish. It is also available in stainless steel finish. View Details

These widely used in the hospitals and related sectors for mounting high beds and for other purposes. View Details

Mils Steel Sheet duly double press bent. M.S. Tubular frame fitted on PVC stump. View Details

Locker made from machine pressed CRCA sheet with three sides enclosed with one box and one drawer. View Details

Framework of MS tubes mounted on two 10 cms castors and two legs with PVC shoes. View Details

Lsskenya Thermometer Oral, prismatic type, clinical is a economy model View Details

Lsskenya Flat oval thermometer is a clinical lens front, dual scale and cylindrical bulb, available with plastic case. View Details

Veterinary, heavy duty glass thermometer, dual scale, normal animal temperature listed on back side. View Details

Temperature reading time: 15 seconds Range: 35-40°C & 95-104 ° F View Details

Range: 35-39°C & 95-100°C Basal (ovulation) thermometer for fertility. View Details

Lsskenya Accurate and fast thermometer which is environmental friendly View Details

Lsskenya Accurate and fast thermometer which is environmental friendly and very safe to use. View Details

A compact and reliable Sphygmomanometer supplied with adult velcro View Details

There is a button beside the LCD screen, if you put the button down, it will be Oscillometric measuring View Details

Lsskenya Supplied with adult velcro cuff. View Details

Lsskenya Round shape 147mm diameter dial (360 degree direction adjustable) View Details

Mercurial Sphygmomanometer is traditional blood pressure measuring instrument View Details

Gradient adjustable for easy reading. Round shape 147mm diameter dial. View Details

Lsskenya Mercurial Sphygmomanometer is traditional blood pressure measuring View Details

Nylon cuff without D-ring. 1 tube adult size bladder. View Details

Low battery indicator Requires 4x1.5V AA Alkaline batteries View Details

Lsskenya Round shaped dial diameter 147mm, special precise mechanism, metal castors. View Details

2-tube adult latex bladder Standard latex bulb View Details

Reliable and clear acoustics offer an advantage to health care professionals View Details

Chrome plated chest piece, brass/aluminium/stainless steel. View Details

Chrome plated chest piece, brass/aluminium/stainless steel. View Details
.jpg)
Lsskenya Much more economical than other conventional alternatives. View Details

Lsskenya direct heart beat of baby can be heared without any conversion as like in ultrasound machine. View Details

Lsskenya Double ended with reflex point and brush. View Details

Iodine Cup Made up of Stainless Steel. Iodine Cup, Capacity 60ml, Diameter 60, Height 60 mm View Details

Made up of Stainless Steel Forceps Jar, Stainless Steel 2" x 8" View Details

Lsskenya Made of natural latex, soft and sensitive, micro rough finish for better grip. View Details

Lsskenya Made of plastic. Textured finish for sensitivity. View Details

Made of natural latex. Micro rough finish for better grip. View Details

Safe, pinhole free, non irritant, automatically shaped & textured for excellent grip View Details

Protection of floor against contamination from foot wear. View Details

Lsskenya Protection of floor against contamination from foot wear. View Details

Lsskenya 3mm P.V.C. non toxic tubing, single drip B.T. P.V.C. moulded B.T. chamber. View Details

Lsskenya designed for tracheal/broncheal suction, smooth implantational View Details

Smooth coned distal end with corrosion resistant stainless steel balls to assist the passage View Details

Winged infusion set, ultra-thin wall with sharp bevel needle, kink free P.V.C. tube View Details

Lsskenya for feeding infant and neonates, super smooth, coned tip having two lateral View Details

Super smooth catheter with round tip for trauma free insertion. View Details

Lsskenya manufactured from Non toxic, Non irritant P.V.C., designed for administration of oxygen View Details

Siliconised & smooth outer surface to reduce chances of tissue irritation, thermosensitive View Details

Our automatic assembly line ensures mass production and every product meets the stringent global standards of quality. View Details

Siliconised & smooth outer surface to reduce chances of tissue irritation, thermosensitive material View Details

Round type with double tubular aluminium body. View Details

Simple two button operation. Music function can attract baby attention to reduce infant swing. View Details

Max capacity: 20kgs. Display: LCD kilograms and pounds interchangeable. View Details
.jpg)
Edge-tap switches on. Auto zero resetting/Auto off. View Details

Power: 1X3V lithium cell Dimensions of the scale: 39X30X2.6cm View Details

Dissecting Instruments Set consisting of 6 instruments, all made of stainless steel. View Details

Dissecting instruments set consisting of 10 instruments, all made of stainless steel. View Details

Dissecting instruments set consisting of 20 instruments, all made of stainless steel. View Details

Dissecting Kit (Economy) 18 Instruments in plastic box: View Details

Lsskenya Stainless steel handles slotted to accept standard blades. View Details

Lsskenya Polystrene, autoclavable handles to accept standard blades. View Details

Stainless Steel. Tailor Scissor, Size: 10inches View Details

Scissor Plastic Handle Scissor Plastic Handle, 6" View Details

Steel, Straight Needle Steel, Bent Needle View Details

Dissecting Awl Stainless steel spike with wooden handle. Size: 50mm View Details

All stainless steel, blunt end needle. Size: 125mm View Details

Section Lifter Stainless Steel with bent-up blade. Section Lifter 100mm View Details

Types Available: Dissecting Pins, MS, Chrome Plated. View Details

Flat one side with plastic handle. Lsskenya High Quality Steel. View Details

Lsskenya soft wood board with raised edges. Pin can be easily pressed with the help of hand only. View Details

Lsskenya made from stainless steel. Rectangular, with flanged edges. View Details

In Sheet with Angular Sides. Types Available: Dissecting Tray, in G.I. sheet with wax layered bottom surface. View Details

Curette Uterine Sharp and Blunt. Lsskenya made of Stainless Steel. View Details

Made of Stainless Steel. Corrosion Proof and Highly Reliable for Medical Application. View Details

Made of Stainless Steel. Corrosion Proof and Highly Reliable for Medical Application. View Details

Retractor, lsskenya made of Stainless Steel. Retractor Pronged Blunt. View Details

Speculum Stainless Steel Type of Speculum: Speculum, Vaginal, Graves View Details

To show the internal structure skull cap, lungs, stomach, liver, intestine etc. can be removed. View Details

Lsskenya 24 parts like removable head, heart, stomach, intestines, etc. Sex organs are present for both male and female. View Details

Helps to understand the external features and internal structures of the heart View Details

It is about 450mm (appx.) in height. To show the internal structure Brain View Details

Appropriately coloured, nicely finished and numbered with key card. View Details

Appropriately coloured, nicely finished and numbered with key card. View Details

Appropriately coloured, nicely finished and numbered with key card. View Details

This model shows the internal organs like half of the brain, one eye View Details

It features an exposed spine with removable vertebra and spinal cord segment with interchangeable male and female genitalia. View Details

The internal organs : lung, kidney, bladder etc. are removable. View Details

Shows 53 positions. Mounted on board. View Details

Appropriately coloured and numbered with key card. View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

The distributions of the bronchial tree can be observed through the transparent lungs View Details

Constructed of two rubber balloons, rubber stopper and bell jar. View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

Demonstrates the respiration realistically by the movement of the rib cage and diagram. View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

One half of the model is removable and divided into three parts epiglottis, vocal cords and arytenoid cartilage. View Details

Mounted on a base, Appropriately coloured and nicely finished. View Details

The model shows the small branches of principal bronchus: Section of bronchiole of no cartilage. View Details

To study the internal structure of the heart remove the anterior wall, including the entrance points View Details

This heart model is divided into two parts showing internal and external anatomy including valves View Details

Lsskenya both ventricles and atria are open to expose the valves and large blood vessels near the heart and musculature. View Details

Appropriately coloured and numbered with key card. Lsskenya Issectable in 4 parts. View Details

Squeeze bulb pumps simulated blood through clear heart chambers just like real one. View Details

The wall of heart is made of flexible material which can demonstrates the heart beating by the mechanical power behind it. View Details

Life size on stand with base. Size : 40x12x12cm View Details

Lsskenya Mounted on a base, appropriately coloured and numbered with key card. View Details

The duodenum, caecum and rectum are opened then removed the transverse colon and front stomach wall. View Details

Digestive system features : nose, mouth cavity and pharynx, esophagus, GI tract, liver with gall bladder, pancreas and spleen. View Details

Human Intestinal Villus Model comprises longitudinal section villus showing the arterioles View Details

Duodenum showing its internal structures and the position of the pancreatic ducts View Details

An economical way to study the basic structures of the spleen, liver, blood vessels and pancreas. View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

Human Liver Model showing the Liver, Gall Bladder, Cystic Duct, Duodenum View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

The model shows the structures of the gastric folds, pyloric sphincter muscles, pyloric valve, gastric mucosa View Details

Shows wall of the caecum and appendix. Separated into 2 parts. View Details

Shows the component and structure of the lymphatic system. View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

Male pelvis showing internal and external reproductive organs and other vital organs of the pelvic View Details

Life size, right half of the pelvis showing female reproductive organs, uterus, bladder, rectum and ovary. View Details

With a median section, both internal and external organs are clearly shown. View Details

With a median section, both internal and external organs are clearly shown. View Details

Apropriately coloured and numbered with key card. On base. View Details

Kidney is divided into two removable parts: The front half enable the study of cortex medulla calices and cortex. View Details

The third model of a glomerulus shows the Bowman capsule, afferent and efferent arterioles, capillaries and podocytes. View Details

Kidney and bladder prostate are removable. Showing urinary bladder, kidneys with ureter View Details

The female insert consists of a two parts Bladder, Uterus and Ovaries: The male insert features a two parts Bladder and prostate. View Details

Made of PVC Plastic with a size of 20x20x50 cm. This is intended to understand the external features View Details

It is made of PVC Plastic with a size of 20x20x50 cm. View Details

Lsskenya shows the penis, prostate, bladder, seminal vasicle, spermatic cord and inguinal canal and base. View Details

It shows internal and external female genital organs. Shows 40 positions. View Details

The renal calices, the renal pelvis and the ureter are opened to identify the position View Details

Shows ventral side, brain stem and spinal cord. Branches up to the coccygeal plexus, sympathetic trunk View Details

Anterior and posterior nerve roots are exposed and color coded. View Details

It is standing type with metal rod. Lsskenya model consisting of fixed DNA segment. View Details

Each base in the 12 base pair model is a subtly different shape, and the sugars View Details

Each of the four nitrogeneous bases comes in a different unlabeled color, so students can design their own pair ciding. View Details

The components consist of four nucleic and bases : adenine, cytosine, guanine and thymine View Details

An excellent kit for one or two student to build a double helix of DNA View Details

An atriculated model to show the double helix of DNA structure. View Details

This simple model demonstrates the functioning of lungs for students. View Details

Material: Plastic Mould Material: PVC View Details

This enlarged model that shows structure of the nose. View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

This 2 part brain is divided into the right half and left half. Appropriately coloured and numbered with key card. View Details

This 4 part brain is medially divided into, the right half which is further divided into frontal with parental lobes. View Details

On removable base, appropriately coloured and numbered with key card. View Details

The arterial supply of the brain: sources, vertebral, internal carotid arteries View Details

Lsskenya mounted on the base, appropriately coloured and numbered with keycard. View Details

This model shows the central nervous system containing two sets of model. View Details

The model of human head and neck showing the all internal organs like median section of brain View Details

The base segment of the 12 pair of brain nerve are shown in yellow. View Details

This model shows all relevant structures in great details. Size: 19x18x6 cm View Details

Mounted on stand, appropriately coloured and numbered with keycard. View Details

Mounted on base, appropriately coloured and numbered with keycard. View Details

Nasal Cavity : on the lateral nasal wall show the superior, middle and inferior nasal View Details

The tympanic membrane with malleus and incus are also removable. View Details

Consisting of dissectible 5 parts. Ideal for explaining hearing mechanism. View Details

Lsskenya Made of PVC Plastic. Dissectible in 6 parts. View Details

This model is 3 times enlarged and divided into six parts. View Details

The eye itself is horizontally sectioned, and the sclera with clear cornea and muscles are removable. View Details
.jpg)
The eyeball has a horizon cut, the upper half of eyeball wall and the inner structures can be removable. View Details

Mounted on a base, appropriately coloured and numbered with key card. View Details

Enlarged for demonstration to a group. With tooth brush. View Details

Lsskenya Model with Hinge. Enlarged 1.5 times. View Details

Mounted on a stand appropiately coloured and nicely finished. View Details

Mounted on a base, appropiately coloured and nicely finished. View Details

The jaw is dissected to show roots, nerves, and vessels. Lsskenya Mounted on a base. View Details

On a base, appropiately coloured and nicely finished View Details

Mounted on a stand, appropiately coloured and nicely finished. It model shows lower View Details

Mounted on a stand, appropiately coloured and nicely finished. View Details

Mounted on a stand, appropiately coloured and nicely finished. View Details

Includes lower premolar tooth(1 parts), lower incisor tooth(2 parts), lower canine tooth(2 parts), lower molar tooth View Details

The model is made of hard plastic and sits securely on two metal pegs attached to large display platform. View Details

Used for Hospitals and Dental Clinic. Lsskenya made of Plastic. View Details

Material: Plastic Thickness: 40 microns - 100 microns View Details

The apparatus consists of two stoppered boiling tubes connected by three-way taps to either limb of a graduated manometer. View Details

Lsskenya comprises two boiling tubes each with stopper and two lengths, one short and one long View Details

The Portable Peak Flow Meter and the standard used by the majority of healthcare professionals. View Details

Lsskenya, the life size model of skeleton duly articulated and made up View Details

The life size model of skeleton duly articulated and made up of a mix View Details

Features nerve branches, vertebral artery and hamiated lumbar disc. View Details

On Plastic stand with metal rod. Made of plastic. View Details

Real life model consist of durable parts with ABS stand having detachable joints. View Details

It is a visual aid for instructions of anatomy to students, doctors, nurses or anyone interested in human skeleton. View Details

All removable parts including all limbs, rib cage, two part heart View Details

The left hand side is painted to show the muscle origins in red and insertions in blue. View Details

Depicts the position, course and distribution of main arteries and peripheral nerves. View Details

Made of a mix of fibre glass and clay. Numbered with key card. View Details

Dissectible into 3 parts. This economical life-size adult plastic skull features View Details

This can be disassembled into 3 parts. View Details

The basal portion of the skull has been sectioned sagitally, displaying all 3 sinuses. View Details

The mandible is spring hanged to view the bone structures of the mouth. View Details

A whole set. Human Infant Skull Model. View Details

To illustrate abduction, anteversion, adduction, retroversion and internal/external rotation. View Details

Demonstrates flexion, extension and internal/external rotation of the radius. View Details

Biceps and triceps are made of flexible material, extension abd flexion can be shown View Details

Including flexible artificial ligaments. Made up of PVC plastic with natural size. View Details

Demonstrates anteversion, abduction, retroversion and internal/external rotation. View Details

Includes flexible artificial ligaments. Demonstrates flexion, extension and internal/ external rotation. View Details

Fully flexible joint to demonstrate abduction, retroversion and internal/external rotation. View Details

A fixed type to show the general features of the knee joint. On base. View Details

Each foot has 23 numbered parts. Lift size, finely detailed models of the foot depicting View Details

These model sizes are just the same as realities and made of PVC Plastic. View Details

These model sizes are just the same as realities and made of PVC Plastic. View Details

Lsskenya Life size Lumbar Vertebrae are shown with normal intervertebral View Details

Lsskenya shows all significant features of each vertebra, including spinal cord, nerve roots View Details

Showing the osteoporosis and blood vessels. Size : 18x14x18cm View Details

The skull has a calvaria cut and a spring-held lower jaw. Comes with an entire skull and pelvis. View Details

Flexibly mounted on stand, removable. Consists of an occipital bone of the skull, 7 cervical View Details

Flexibly mounted on stand, removable. View Details

Consisting of the 5 lumbar vertebrae with intervertebral discs, sacrum with flap, coccyx, spinal nerves and spinal cord. View Details

Life size. With sacrum and coccyx and herniated disc. View Details

Lsskenya Made of PVC Plastic Life size. View Details

Supplied in pairs, red and blue painted with keepers. Lsskenya made up of Chrome Steel with moderate strength. View Details

Alnico magnets of superior strength are supplied in pairs with keepers. View Details

Chrome Steel magnets with moderate strength. Lsskenya Supplied in pair with keepers. View Details

Alnico Magnet of superior strength, comes in pairs, with keepers. View Details

Lsskenya made up of chrome steel with moderate strength, with keepers and painted in red. View Details

Alnico magnets of superior strength, with keepers. Painted in red. View Details

Lsskenya Chrome Steel magnets of moderate strength, with keeper. View Details

Alnico, magnets of superior strength with keepers. Centre gap is 18mm View Details

Ferrite disc magnets. Basic properties include low cost and high coercivity. View Details

Ferrite ring magnets. They are also hard and brittle. View Details

It possesses high power for small sizes and exhibit high resistance to demagnetization. View Details

Magnets are coated with polish. It possesses high power for small sizes View Details
.jpg)
Ceramic, in natural finish. High Field strength. View Details

Comprises of five ceramic ring magnets, 32mm external diameter and a wooden rod on a base overall height 150mm. View Details

Two plastic hooks, which moves along the aluminum meter scale is also provided. View Details

Two solid and two hollow cylinders each 10cm long accurately fitting the bore of a hollow brass tube View Details

It consists of an aluminum disc of approximately 6" diameter with a groove View Details

Lsskenya consisting of a brass Disc about 15 cm diameter, 6mm thick View Details

The sides of wheel are smoothly painted. The base is provided with four holes View Details

The one end of suspension wire hangs from the universal clamp View Details
.jpg)
A tall U-shape metal bridge with a split chuck fitted into disc enable accurate suspension and torsion. View Details

Two cast iron feet each with 3 through holes and grub securing screws View Details
ApparatusVerticalPattern.jpg)
Three pointers for clamping to the test rod are provided. View Details

Sharp knife edge with hanger is also provided which moves on metal bar. View Details

It consists of a brass beam 9 mm square, one meter long resting on the knife edges of two heavy table clamps. View Details

In this apparatus, a hook is provided to one end of steel chrome plated bar having dimension 100x18x0.3cm. View Details

It consists of 120x1.2cm brass bar with pointed ends carrying two sets of adjustable knife edges and two large and small brass weights. View Details

The plate is suspended by means of two strings of equal lengths from a rigid suspended View Details

It consists of 15x60cm wooden board with glass top hinged on an iron base to which a sector with graduated arc and vertical scale is provided. View Details

Provided with trolley for conducting experiments with ease. Lsskenya made of wood with frictionless pulley. View Details

Adjustable with with the help of grooves. Superior quality track in form of grooves with trolley. View Details

Made of polished wood size 7.5x60 cm with frictionless pulley. View Details

At thick plywood piece of thickness 12 mm. View Details

The rail rods are held in heavy clamps which are fitted in two vertical rods, mounted on cast iron feet. View Details

A well balanced; machine turned aluminium disc rotating at about its axis and can be clamped on a tripod stand in vertical plane. View Details

Complete with leveling screws, four sliding clamp pulleys, central ring, string and four sets View Details

Complete with cord and hooks. Without weights. View Details

The validity of the law of conservation of energy is demonstrated using the Maxwell disk View Details

The hand rotator meets the requirements for many different applications in the laboratory. View Details
.jpg)
Accuracy for Constantan Coil ±0.05% to ±0.1percentage and for Manganin Coil ±0.02percent to ±0.05percent. View Details

The Resistance Substitution Box is a convenient instrument in determining the desired resistance values in circuits under design or test. View Details

These units employs high stability metal film resistance element having superior View Details

The 4-Ratio P.O. Box has sixteen coils as above and two proportional arms each with coils of 1, 10, 100, 1000, ohms. View Details

These come in variations starting from 50 Ohms, 100 ohms, 500 Ohms to 1000 Ohms. View Details
Wire.jpg)
The guide rod carrying contact black is tightened with screw to projection of the supports. View Details

Heavy brass block is provided for smooth movement for long life. View Details

The four-gap bridge has a large and heavy copper strip of mounted on a heavy 3/4 inch thick laminated base. View Details

A knife edge jockey is also supplied. It consists of a wooden base with brass blocks View Details

A heavy lock type brass plated terminal is provided for connection with Lead. View Details

Base - Plastic Transparent Board Type - Single Sided View Details

Board Type - Single Sided Ideal for usage by students in a School Laboratory to understand basic View Details

Hoffmans Voltameter to demonstrate that H2O consists of two volumes of Hydrogen and one volume of Oxygen View Details

Case: Clear Trasparent case with white ABS base Scale Length: 50 mm (approx.) with knife edge pointer View Details

An ammeter is a measuring used to measure the current in a circuit. View Details

A galvanometer is an electromechanical instrument for detecting and measuring electric current. View Details

The apparatus is used to study and verify the ohms law. Two 4 mm socket terminals are provided View Details

Tangent galvanometer is an early measuring instrument for small electric currents. View Details

A voltmeter, also known as a voltage meter, is an instrument used for measuring the potential difference, View Details

You can use this meter as a voltmeter and as an ammeter, simply by sliding the scale. View Details

This galvanometer has been designed for very low current measurement. View Details

Lsskenya consist of an integral taut suspension movement, lamp unit and scale, the indication View Details

Accuracy: ±2.5 % FSD Dimensions: 300x150x300 mm. View Details

Demonstration Vertical Meter is designed to demonstrate the working of moving coil type meters. View Details

Horizontal type in transparent case with bakelite base. It is very useful for demonstration. View Details

It is housed in unbreakable ABS case with clear transparent front cover and operated on 1.5V AA cell. View Details

Portable Meter are designed for use in the laboratories of polytechnics & engineering colleges. View Details

Prisms made of solid glass blocks with sides. Plane plates for spectrometer work. View Details

These Equilateral Triangular Glass Prisms are great for light experiments and teaching View Details

Lsskenya Made of calcite/quartz with polished surfaces. With optical axis parallel to refracting edge. View Details

Each prism is made of highly polished acrylic. Each set includes three equilateral prisms. View Details

Glass prism reflection Prism’s equilaterals have and also used to disperse. View Details

Magnifying hand lens with white plastic handle in 50mm diameter are useful in viewing objects clearly. View Details

Different diameter lenses available. Superior Type. Hand Lens with black plastic handle and case. View Details

Use the lenses separately or combine them for a variety of magnifications. View Details

This set contains 7 different lenses and prisms to demonstrate a wide range of optical principles. View Details

These clear plastic magnifiers are ideal for elementary through high school classroom use. View Details

The set includes one each of concave, convex, double concave, double convex, plano concave View Details

Magnification: 5X Focal length: 65mm (2.5″) View Details

These mirrors allow for a simple way to illustrate the principles of reflection. View Details

The Newton’s Rings Apparatus consists of a plano-convex lens on top of a flat glass plate, held together by a plastic frame. View Details

The base and arm are made of cast alloy with a baked enamel finish; the 10X wide-field View Details

Magnification: 10X Aperture: 18 mm (0.75″) View Details

Demonstrate variable transmission of light or chec stress patterns in plastics View Details
The ball passes through the ring when cold but will not pass through after being heated. View Details
The whole apparatus is of metal. With engraved scale. View Details
A metal rod is inserted into the steam chamber and steam is applied. View Details
Fitted in wooden case lined with felt. The front portion of the case is removable. View Details
A hole for thermometer is drilled radially in each and the cylindrical brass View Details
Two terminals are connected to coil of wire for passing current. View Details
The element is easily detachable and is encased in a wooden case lined with felt and provided with a hinged cover. View Details
The level cannot rise above a central overflow tube in the chamber. View Details
A rotating cast aluminium cylinder rotates freely on a cast metallic pedestal and to its axle rotating vanes View Details
The cap is fitted with one bent tube, one stopcock for connection to a pump and another stopcock for opening to air. View Details
It rotates with minimum friction, and is balanced to avoid bias towards any particular direction. View Details
Lsskenya comprises of three light-weight hemispherical plastic cups attached to a central hub through View Details
The vertical spindle carries three cups which rotates on ball bearings and gives digital display. View Details
The vertical spindle carries three plastic cups, which rotate on ball bearing and gives reading through meter. View Details
Compact and light weight design Automatic power off View Details
Lsskenya supplied in case with a ceiling bracket, constant weight and suitable wire. Without weights. View Details
Lsskenya complete in case with wire Ceiling attachment and constant cast iron weight. View Details
It consists of 30cm long mirror scale, spring, slotted weights with hanger and pointer, complete on stand. View Details
The 30cm long wire under test is connected to two brass rods about 30cm long at their mid points by two screws fitted at the ends of the wire. View Details
It consists of a cycle rubber tube of about one meter length View Details
The 9mm rod is also attached to metal plate, so that complete clamp can be held in any stand View Details
Maximum height capacity – 12 inches. Lsskenya, Having a cast aluminium 4 inches View Details
It comprises a circular metallic plate with three leveling screws and a sensitive spirit level. View Details
Fitted on tripod stand with leveling screw. For measuring the surface tension of soap film View Details
Complete with manometer, capillary tube. All mounted on suitable wooden stand. View Details
On the lower end a rubber cork without holes is fitted whereas on upper end a rubber cork with a funnel is provided. View Details
The outer cylinder can be clamped at any desired height and the inner cylinder is graduated in mms and slot is covered by a transparent cover. View Details
G.I Sheet hammer tone finish,the top edge is flared to add strength. View Details
Used in Archimedes experiment. View Details
It consists of a hollow metal cylinder, upper loading pan and bucket suspended of the bottom for stability View Details
Comprising three limbed tube mounted on polished stand with meter scale 45 cm with 0 at the bottom. View Details
Lsskenya mounted on Wooden Base with scale of 15cm on base with meter rule. View Details
Lsskenya mounted on Wooden Base to stand on table with scale of 50 cm printed on base or with meter rule. View Details
Set of six different elements in cylindrical form for density in electrical and thermal experiments. View Details
Set of six different metals. They consist of one piece each of copper View Details
Set of six different metals. The set consists one piece each of brass, aluminum View Details
The aluminum plate is provided with a stop cock air inlet screw and a connection for rubber pressure tubing. View Details
It consists of a 2 litre bell jar with a rubber stopper fitted with binding posts and connectors from which an electric bell is suspended. View Details
Low vacuum cum Low-Pressure Double Stage pump lsskenya to create View Details
Two concave aluminum cups having diameter either 62mm or 75 are provided with handle and stop cock. View Details
Sheet metal cylinder 400 x 68 mm diameter with three equal size offices art different heights down on side. View Details
When held with the holes in a horizontal plane and piston is pushed in, water will stream out at the same distance from each hole. View Details
The two flow tubes, each 500 x 13mm (L x OD) have three sealed-in short side tubes View Details
A lever arm pivoted to the vertical support rod has a pressure disc on one end to close the hole and a counterpoise pan. View Details
It consists of four differently shaped glass tubes connected at the bottom, mounted on a bakelite stand. View Details
It comprises 5 glass graduated capillary tubes of equal bore and bulbs at the bottom, mounted on a support frame View Details
Consist of Jollys air bulb connected to a glass mercury reservoir through flexible rubber tubing View Details
A short length of the rubber tubing with two pinch clips of on short length of glass tubing mounted in end of wide-bore plain limb wit rubber bung. View Details
There is a oil chamber with Bourdon gauge at the top, graduated 0 - 3.4 x 105 Nm-2 and has a valve View Details
The case has a transparent perspex back to clearly observe the working of the gauge mechanism. View Details
Working model made of glass, consist of a cylinder and piston provided with non-return float valves and a side tube for outlet View Details
Consist a glass cylinder with a non-return float valve at its lower end with a outlet side View Details
It apparatus consist of the plated cylindrical tubes of different diameters fitted with piston and connected View Details
The plastic tube rests in a cylindrical ring, which has three tightening screws equally spaced around the rim, for firm gripping of plastic tube. View Details

General Description Lancet, safety, 2.4mm, disposable.
Note:
View Details
Pipette tip, white, 2-20 ul, Rack/960
Note:
View Details
Material: polypropylene, transparent Sterile, RNase and DNase free
Note:
View Details
Inside, water resistant lining Strong paper outside
Note:
View Details
Storage box for test tubes of indicated volumes Designed as rack with lid, fitting together
Note:
View Details
Suitable for 100 microscopes slides Base made of cork
Note:
View Details
Slides extend above the opening allowing manipulation without using forceps
Note:
View Details
Scale, digital, 1500g – 2000g Response time < 1 second
Note:
View Details
Material: paper Writable with pen or marker
Note:
View Details
Material: chemical resistant plastic Provides positions to hold 240 tubes
Note:
View Details
Material: non-woven with outer layer impervious liquid splash resistant material
Note:
View Details
Mixing and vortexing radius 1.5 mm Mixing orbit 3mm Bench-top Thermomixer with speed range
Note:
View Details
Operation temperature 10C to 40C Dry block for 5ml tubes suitable for thermomixer
Note:
View Details
Plastic storage and transportation bag for potential bio-hazardous waste
Note:
View Details
Leak-proof, puncture-resistant plastic container for disposing of potentially infectious sharps Non-sterile
Note:
View Details
Material: Plastic (PP) Containing K²EDTA 1.3-2.2 mg
Note:
View Details
Material polypropylene or equivalent Chemical and heat-resistant
Note:
View Details
Material polypropylene or equivalent Chemical and heat-resistant, autoclavable plastic
Note:
View Details
Primary packing - capacity: 4 (four) to 6 (six) vacuum tubes in size 5 to 7ml
Note:
View Details
Material: natural latex Non-sterile
Note:
View Details
Material: cotton, non-shrink (less than 5%) Standard laboratory coat, long sleeves
Note:
View Details
Anti-D blood grouping reagent Contains monoclonal murine IgM antibody
Note:
View Details
Material: colourless glass Diameter: approximately 6mm
Note:
View Details
Material: colourless glass With lid
Note:
View Details
Material: colourless glass Microscopy slide cover
Note:
View Details
Material: Glass Double grid, improved Neubauer
Note:
View Details
Material: Clear glass Graduated from 0 - 200mm
Note:
View Details
With glass cover withstanding stain and organic solvents.
Note:
View Details
Material: low density polyethylene (LDPE) Colour: black
Note:
View Details
Material: nitrile Gloves for routine clinical laboratory work Powder free
Note:
View Details
Material: colourless plastic Sample container suitable for a wide range of clinical specimen
Note:
View Details
Material: polypropylene Reservoir for short-time containment of reagent and chemicals
Note:
View Details
Tube material: low density polyethylene (LDPE) Sterile
Note:
View Details
Adhesive is hypoallergenic and water resistant Central non-stick pad
Note:
View Details
Material: Plastic (PET) Blood collection vacuum tube without anticoagulant
Note:
View Details
Material: Plastic (PET) Vacuum Blood Collection Tube Gel Clot Activator
Note:
View Details
Plastic (PET) Vacuum Blood Collection Tube EDTA K3
Note:
View Details
Material: polyethylene terephthalate Conical bottom
Note:
View Details
With screw cap Material: polypropylene
Note:
View Details
Diameter: 1,15 mm Vials of 100 tubes
Note:
View Details
Heparin coated Tubes are packed in glass boxes of 100 tubes each
Note:
View Details
Well edges slightly raised facilitate plate sealing Thin walls for optimal thermal transfer
Note:
View Details
With 24 slot tray for holding capillary tubes Sealant for capillary tubes
Note:
View Details
Material chemical resistant plastic or card board
Note:
View Details
Collects blood and preserves proteins for future nucleic acid analysis
Note:
View Details
Tourniquet used for venipuncture, during blood sample collection
Note:
View Details
With 2 squeeze bottles saline solution: approx. 1000 ml each
Note:
View Details
Storage box for standard microscope slides with a size of 7.6 x 2.6 cm
Note:
View Details
Material: stainless steel Sturdy base provides optimal stability
Note:
View Details
Material: Heat stable Plastic (plexiglass) Provides vertical position for 12 microscopy slides
Note:
View Details
Material plastic-coated wire
Note:
View Details
Complete set-up to measure erythrocyte sedimentation rate
Note:
View Details
Made of stainless steel Provides positions to hold 24 test tubes
Note:
View Details
Handle made of wood, plastic or aluminium 3 same size pencils
Note:
View Details
Range: -10C/+110C None-mercury filled
Note:
View Details
Material: Mechanics inside made of steel Mechanical, spring driven countdown timer, professional use
Note:
View Details
Output conductivity, approximately 2 uS/cm, at 25C Tank capacity approximately 4L
Note:
View Details
Equipped with micro agitator homogenizing bath temperature
Note:
View Details
Electronic temperature monitoring and controlling Maximum capacity: 32 Litres; with natural convection
Note:
View Details
Electronically controlled motor with infinitely variable speed
Note:
View Details
Accommodates 8 detachable, disposable tips, ranging 20-200ul
Note:
View Details
Reproducibility 0.1 g 7 segment LCD display with backlight Levelling feet and level indicator
Note:
View Details
Non-skid feet prevent shaker from sliding Power requirements: 100V ~ 240V, 50/60Hz with voltage surge protection
Note:
View Details
Rotator for blood collection tubes used to ensure thorough mixing and to prevent clotting in blood sample tubes
Note:
View Details
Platform size: approximately 24x24cm, accommodates flasks, beakers, dishes and Petri-dishes
Note:
View Details
Dismountable aluminium gear structure Hand operated
Note:
View Details
Adjustable speed up to 6000rpm Timer 1-99 minutes
Note:
View Details
For haematocrit capillary tubes Automatic brake and lid interlock
Note:
View Details
Accommodates flat, round, U or V-shaped bottom plates 75 user-definable protocols
Note:
View Details
Single, dual & multi wavelength endpoint measuring modes Extended wavelength range 380-900nm
Note:
View Details
Audio signal indicates reaching one hundred cells counted Separate lever
Note:
View Details
With digital alphanumeric display and integrated printer Accuracy of measurement, approximately: 5%
Note:
View Details
Method: Flow-cytometry, colorimetry, electrical impedance
Note:
View Details
Parameters: Routine chemistry analytes (substrates, electrolytes, enzymes, lipids, immunoturbidimetric)
Note:
View Details
Punching diameter: approximately 3.0mm Puncture can be sterilised by autoclaving.
Note:
View Details
Single-use, sample collection and measuring microcuvette.
Note:
View Details
Blade depth approx. 2.4mm Single-use disposable
Note:
View Details
A complete stand-alone SDD refrigerator with all necessary components and fittings (Plug and Play).
Note:
View Details
A complete stand-alone SDD refrigerator with all necessary components and fittings (Plug and Play).
Note:
View Details
A complete stand-alone SDD combined refrigerator & freezer with all necessary components and fittings
Note:
View Details
A complete stand-alone SDD refrigerator with all necessary components and fittings (Plug and Play).
Note:
View Details
A complete stand-alone SDD refrigerator with all necessary components and fittings (Plug and Play).
Note:
View Details
A complete stand-alone SDD refrigerator with all necessary components and fittings (Plug and Play).
Note:
View Details
A complete stand-alone SDD refrigerator with all necessary components and fittings (Plug and Play).
Note:
View Details
A complete stand-alone SDD refrigerator with all necessary components and fittings (Plug and Play).
Note:
View Details
A complete stand-alone SDD refrigerator with all necessary components and fittings (Plug and Play).
Note:
View Details
A complete stand-alone SDD combined refrigerator & freezer with all necessary components and fittings (Plug and Play).
Note:
View Details
A complete stand-alone SDD combined refrigerator & freezer with all necessary components and fittings (Plug and Play).
Note:
View Details
A complete Stand-alone SDD Freezer with all necessary components and fittings (Plug and Play).
Note:
View Details
Ambient operating temperature: Min. +5°C, Max. +43°C Power requirement: 220-240V 50Hz
Note:
View Details
Grade A Freeze Free Vaccine carrier, long range, for transport of vaccines.
Note:
View Details
Ambient operating temperature: Min. +5°C, Max. +43°C Freeze Protection: Grade A
Note:
View Details
Ambient operating temperature: Min. +5°C, Max. +43°C Freeze Protection: Grade A
Note:
View Details
Cold box, Large, long range for transport of vaccines. Vaccine storage capacity 20.25 litres.
Note:
View Details
With lid and carrying handle. Supplied with one set of 0.6 litre icepacks.
Note:
View Details
Cold box, Samll, Long range,for transport of vaccines. Vaccine storage capacity 12 litres.
Note:
View Details
Cold life 30.3 hours at 43°C without openings. Vaccine storage capacity 3 litres.
Note:
View Details
Vaccine storage capacity: 5.4 litres. Cold life without openings: 35 Days at +43°C.
Note:
View Details
Alarm: Visual, 30-day overview as a display OK / ALARM display (for 30 previous days)
Note:
View Details
Alarm: Visual, display shows either a tick for OK or a cross for Alarm display (if the indicator is exposed
Note:
View Details
Battery shelf life: 60 months Activated life: Device always active (60 months battery life)
Note:
View Details
Battery type: Non-replaceable CR lithium Battery shelf life: 12 Months
Note:
View Details
Grade A, user-independent freeze protection No intervention is required by the user to ensure
Note:
View Details
Multi-Purpose Solar Lamp with Phone Charger
Note:
View Details
Sealed 12V/115Ah lead-acid gel cell maintenance-free battery.
Note:
View Details
Battery box Heavy duty metal support structure
Note:
View Details
The CD-ROM provides worldwide coverage with base-map level detail including the following features
Note:
View Details
It has capacity to store up to 500 waypoints/icons, with name and graphic symbols and 50 reversible routes
Note:
View Details
Portable antenna mast kit: four-section collapsible mast, rope guys, erection kit
Note:
View Details
400 channels, 1.6 - 30MHz (250KHz - 30MHz receive), 25 watts (PEP), 12V DC
Note:
View Details
Temperature: 0°C to 55°C. Size: 210mm W x 240mm D x 65mm H (including rear connectors).
Note:
View Details
HF mobile station radio kit; radio w/handset, RF unit, junction box, power cables
Note:
View Details
Data ready with additional cooling fans for interconnect with data modem
Note:
View Details
Complete VHF base station kit, 255 channels, 1-25 Watt, Motorola with fixed mount
Note:
View Details
Select V (Select 5) signalling. 7 programmable buttons, 3 status LEDs.
Note:
View Details
Signal strength and battery level indicator. X-pand voice compression (improved audio quality).
Note:
View Details
Tool kit composed of essential hand-tools (pliers, spanners, screwdrivers
Note:
View Details
Tool kit composed of essential hand-tools (pliers, spanners, screwdrivers, wrenches, coaxial cable crimping
Note:
View Details
Lsskenya Plastic Bottle suitable for storing chlorine and iodine solutions in hospital environment. View Details

Material: Plastic. Capacity: 250 ml. View Details

Material: Nickel plated brass. Safety Pin Medium Size for securing wraps and bandages. View Details

Nylon brush with soft bristles for scrubbing hands prior to surgical intervention. View Details

Material: Polypropylene, autoclavable. View Details

Material: Polypropylene, autoclavable. Round container with base. View Details

Material: Austenitic stainless steel. Composition: 18 to 20% chromium, 8 to 10% nickel. View Details

Material: Austenitic stainless steel; composition: 18 to 20% chromium, 8 to 10% nickel View Details

Material: Austenitic stainless steel composition: 18 to 20% chromium, 8 to 10% nickel. View Details

Material: Polypropylene, autoclavable. Diameter: approximately 346mm. View Details

Material: Austenitic stainless steel composition: 18 to 20% chromium, 8 to 10% nickel. View Details

Material: Polypropylene, autoclavable. Height: approx. 45mm View Details

With removable inner heavy gauge plastic bin with handle. View Details

Special linear reinforced material Chloride and carbon free View Details

Special linear reinforced material Chloride and carbon free View Details

Material: polyester /cotton fabric (50/50% or 65/35%) or 100% cotton fabric View Details

Material: polyester /cotton fabric (50/50% or 65/35%) or 100% cotton fabric View Details

Material: polyester /cotton fabric (50/50%, 65/35%, 67%/33%) or 100% cotton fabric View Details

Material: polyester /cotton fabric (50/50%, 65/35%, 67%/33%) or 100% cotton fabric View Details

Material: Polyester /cotton fabric (50/50%, 65/35%, 67%/33%) or 100% cotton fabric View Details

Material: Polyester /cotton fabric (50/50% or 65/35%) or 100% cotton fabric View Details

Material: polyester /cotton fabric (50/50% or 65/35%) or 100% cotton fabric View Details

Material: Polyester /cotton fabric (50/50% or 65/35%) or 100% cotton fabric View Details

Material: polyester /cotton fabric (50/50% or 65/35%) or 100% cotton fabric View Details

Material: polyester /cotton fabric (50/50% or 65/35%) or 100% cotton fabric View Details

Heavy round base with a precisely designed body, providing convenience for easy lifting and movement.
Note:
View Details
The high-eyepoint lenses on a jointed arm allowing the whole stage area to be scanned.
Note:
View Details
Body : Monocular Tube inclinable upto 90°, Mechanical Tube length 160mm.
Note:
View Details
Body : Monocular Fixed Straight Tube, Mechanical Tube length 160mm.
Note:
View Details
Nosepiece: Triple revolving nosepiece with positive centring & click stops.
Note:
View Details
Viewing Head : Monocular Head 45°, 360°.
Note:
View Details
Nosepiece: Triple revolving nosepiece with accurate centering and positive click stops.
Note:
View Details
Eyepiece : Wide Field Eyepiece WF 10X. Illumination : Built- in Illumination, Incandescent Lamp
Note:
View Details
The student stereo microscope has been designed for Dissection/Inspection of Specimens in Biology.
Note:
View Details
Illumination : Halogen Lamp Illumination 220V/6V20W*. Viewing Head : Binocular head
Note:
View Details
Stage: Built in graduated mechanical stage of 135x120mm. Low coaxial drive controls for easy and smooth scan of specimen slides.
Note:
View Details
Observation Head: 45° inclined Binocular head rotatable through 360°.
Note:
View Details
Observation Head : 45-degrees inclined Binocular head can be rotated through 360-deg.
Note:
View Details
Viewing Head : Compensation Free Binocular Head, Inclined at 30°, Interpupilary Distance 48-75mm
Note:
View Details
Eyepiece : Wide Field Eyepiece WF10X. Objective : Achromatic Objective DIN 4X, 10X, 40X(S), 100X(S,Oil).
Note:
View Details
Binocular Inverted Tissue Culture Microscope with quadruple revolving nosepiece, equipped
Note:
View Details
Microscopes are equipped with Co-axial focussing system and halogen illumination for bright and sharp
Note:
View Details
Focusing : By Rack and Pinion mechanism with adjustable tension collar.
Note:
View Details
The Elementary Microscope is designed for younger students of elementary education.
Note:
View Details
Observation Head:- Trinocular Observation head with 45° inclination, Rotatable through 360° and can be fixed in any direction.
Note:
View Details
It is suitable for all wrapped or unwrapped solid instrument, A-class cavity instrument View Details

Touch screen display of temperature, pressure, time, running status and failure warning. View Details

Automatic sterilization process Interlock function. View Details

Removable probe detects the internal temperature of liquid directly, to ensure the sterilization effect of liquid program. View Details

There are 5 fixed programs and 4 DIY programs according to different sterilization objects View Details

Application range: Vertical Autoclave is mainly used in hospitals, laboratories, universities View Details

As a type of high pressure sterilizer, it takes steam as its sterilization medium which is fast, safe and economic View Details

Build-in open type water tank Easy-clean open type water tank View Details

Lsskenya Table Top Autoclave is an automatic high temperature and pressure rapid sterilizer which works View Details

It is designed and manufactured combines high capacity with cost-efficiency, while offering high operating View Details

Large Capacity Pulse Vacuum Autoclave is Widely used for textiles, metal utensils, filters, glassware View Details

Plasma sterilizer takes H2O2 as sterilizing agent and from plasmatic state of H202 by electromagnetic field View Details

The Lsskenya glass bead sterilizer is commonly used to sterilize forceps, scissors, tweezers, scalpels, needles View Details

Microcomputer control, LCD display and simple operation interface View Details

Hot air sterilizer is used to sterilize small surgical instrument, glass, petri dishes etc. View Details

It's desk-top autoclave sterilizer which is designed for the hospital, clinic, lab, etc. It's mostly suitable for sterilizing View Details

Three shortcut keys for sterilization programs, the sterilization temperature and time can be set freely. View Details

Autoclaves are equipment for sterilizing widely used in microbiology, medicine, podiatry, tattooing View Details

Stainless steel vessel Base tray / shelf View Details

Thermocouple validation gland with easy access panel Over temperature and over pressure cut-out View Details

Variable temperature range, 100 to 138°C (0.2 to 2.4bar) View Details

Fully automatic once filled with water Grade 316L stainless steel vessel View Details

The Lsskenya glass draft shield enclosing the weighing chamber has sliding doors on the sides and top for easy access to the weigh pan View Details

Lsskenya analytical balances incorporate electromagnetic sensor technology and precision mechanical components View Details

Simple recipe weighing and documenting with a combined tare/print function. In addition, the ingredients for the recipe are numbered View Details

Lsskenya Designed for balances offers 15 models that deliver a full breadth of precision readabilities ranging View Details

Density and specific gravity determination are easy with the below balance weighing feature View Details

Precision balances quickly and accurately display sample measurements on a large, backlit LCD screen. View Details

Laboratory Equipment is the best choice for simple operation and economy. The tough durable ABS housing is designed to withstand field View Details

Features for quick and easy weighing. Every Lsskenya is equipped with an AC adapter, auto calibration through the keypad View Details

Wash Down Scales are ideal for food preparation, food processing plants, agricultural facilities View Details

Lsskenya Moisture Balances set a new standard for data communication making recording results faster View Details

The Triple Beam Balance Lsskenya offers the functions and durability you need, plus an array of special features View Details

The indicator can be mounted where you need it: on the scale, on a wall, or seated on a desk giving total flexibility View Details

Floor Counting Scale is a fully featured counting scale with numeric keypad for unit weight and sample entry. View Details

Laboratory Equipments full-featured CBD has the best value in an advanced parts counting scale. View Details















.jpg)















